자료유형
발행기관
- 한국콘크리트학회(57)
- 테크노프레스(37)
- 한국탄소학회(37)
- 한국세라믹학회(17)
- 대한토목학회(14)
- 대한치과보철학회(11)
- 한국강구조학회(11)
- 한국해양공학회(10)
- 대한건축학회(9)
- 대한치과기공학회(8)
- 대한기계학회(6)
- 한국도로학회(6)
- 한국안전학회(6)
- 대한치과보존학회(5)
- 한국농공학회(5)
- 한국복합재료학회(5)
- 한국재료학회(5)
- 한국전기전자재료학회(5)
- 한국건축시공학회(4)
- 한국구조물진단유지관리공학회(4)
- 한국섬유공학회(4)
- 한국지진공학회(4)
- 한국지반공학회(3)
- 대한소아치과학회(2)
- 대한전기학회(2)
- 대한조선학회(2)
- 대한치과교정학회(2)
- 한국고분자학회(2)
- 한국기계연구원(2)
- 한국목재공학회(2)
- 한국분말야금학회(2)
- 한국열환경공학회(2)
- 한국전산구조공학회(2)
- 한국포장학회(2)
- 경북대학교 농업생명과학대학(1)
- 대한치과이식임플란트학회(1)
- 대한턱관절교합학회(1)
- 충남대학교 농업과학연구소(1)
- 한국건설순환자원학회(1)
- 한국결정성장학회(1)
- 한국고무학회(1)
- 한국공작기계학회(1)
- 한국광물학회(1)
- 한국구조물진단학회(1)
- 한국마이크로전자및패키징학회(1)
- 한국문화재보존과학회(1)
- 한국신뢰성학회(1)
- 한국암반공학회(1)
- 한국열처리공학회(1)
- 한국재난정보학회(1)
- 한국정밀공학회(1)
- 한국철도학회(1)
- 한국터널공학회(1)
- 한국터널지하공간학회(1)
간행물
- CARBON LETTERS(37)
- 콘크리트학회논문집(34)
- STRUCTURAL ENGINEERING AND MECHANICS : AN INTERNATIONAL JOURNAL(18)
- 콘크리트학회지(16)
- STEEL & COMPOSITE STRUCTURES : AN INTERNATIONAL JOURNAL(12)
- 한국강구조학회 논문집(11)
- 대한건축학회논문집 : JOURNAL OF THE ARCHITECTURAL INSTITUTE OF KOREA : STRUCTURE & CONSTRUCTION / 구조계(9)
- 한국세라믹학회지(9)
- 한국해양공학회지(9)
- 대한치과기공학회지(8)
- 요업학회지(8)
- COMPUTERS & CONCRETE(7)
- 대한토목학회논문집(7)
- 대한치과보철학회지(6)
- 한국도로학회논문집(6)
- CONCRETE JOURNAL(5)
- THE JOURNAL OF ADVANCED PROSTHODONTICS(5)
- 대한기계학회론문집. TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS. A. A(5)
- 대한토목학회논문집, JOURNAL OF THE KOREAN SOCIETY OF CIVIL ENGINEERS. A. 구조공학, 원자력공학, 콘크리트공학(5)
- 한국안전학회지(5)
- 한국재료학회지(5)
- TRANSACTIONS ON ELECTRICAL AND ELECTRONIC MATERIALS(4)
- 한국건축시공학회지(4)
- 한국농공학회논문집(4)
- 한국지진공학회논문집(4)
- FIBERS AND POLYMERS(3)
- 구조물진단학회지(3)
- 대한치과보존학회지(3)
- 복합재료 : 한국복합재료학회지(3)
- 한국지반공학회논문집(3)
- ADVANCED COMPOSITE MATERIALS : THE OFFICIAL JOURNAL OF THE JAPAN SOCIETY OF COMPOSITE MATERIALS AND (2)
- INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS(2)
- KSCE JOURNAL OF CIVIL ENGINEERING(2)
- RDE : RESTORATIVE DENTISTRY & ENDODONTICS(2)
- THE KOREAN JOURNAL OF ORTHODONTICS(2)
- 대한소아치과학회지(2)
- 대한조선학회 논문집(2)
- 목재공학(2)
- 연구논문집 : 한국기계연구원(2)
- 열환경공학(2)
- 한국구조물진단유지관리공학회 논문집(2)
- 한국분말야금학회지(2)
- 한국전산구조공학회논문집(2)
- 한국포장학회지= KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY(2)
- CURRENT RESEARCH ON AGRICULTURE AND LIFE SCIENCES(1)
- ELASTOMERS AND COMPOSITES(1)
- INTERNATIONAL JOURNAL OF OCEAN SYSTEM ENGINEERING(1)
- INTERNATIONAL JOURNAL OF RELIABILITY AND APPLICATIONS(1)
- INTERNATIONAL JOURNAL OF SAFETY(1)
- JOURNAL OF DENTAL IMPLANT RESEARCH(1)
- JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY(1)
- JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY(1)
- MACROMOLECULAR RESEARCH(1)
- 구강회복응용과학지(1)
- 농업과학연구(1)
- 마이크로전자 및 패키징 학회지(1)
- 보존과학회지(1)
- 열처리공학회지(1)
- 전기전자재료학회논문지(1)
- 전기학회논문지= THE TRANSACTIONS OF THE KOREAN INSTITUTE OF ELECTRICAL ENGINEERS(1)
- 터널과 지하공간: 한국암반공학회지(1)
- 터널기술 : 한국터널공학회논문집(1)
- 폴리머(1)
- 한국건설순환자원학회논문집(1)
- 한국결정성장학회지(1)
- 한국공작기계학회지(1)
- 한국광물학회지(1)
- 한국농공학회지(1)
- 한국섬유공학회지(1)
- 한국재난정보학회논문집(1)
- 한국정밀공학회지(1)
- 한국철도학회 논문집(1)
- 한국터널지하공간학회논문집(1)
전체 선택해제
총 315건 검색
본문검색 결과만 보기
-
Effects of coal tar pitch addition on the wear behavior of carbon/carbon composites
Young Chan Jung, Duk Soo Kang, Kyong Yop Rhee, Soo Jin Park, David Hui 한국탄소학회 Carbon Letters 4 Pages
한국탄소학회 Carbon Letters 2016, Vol.20 9 62-65 (4 pages)
Carbon/carbon (C/C) composites are acknowledged as high performance materials because of their good mechanical properties such as wear resistance, even at the higher temperature, due to their low thermal expansion [1-5]. Their hardness and light weight in addition to their superior mechanical properties at high temperature make C/C composites the best material to make brakes for aircrafts and other high weight vehicles. Accordingly, a number of studies have been conducted on the performance of... -
Yield enhancement of matrix precursor in short carbon fiber reinforced randomly oriented carbon/carbon composite
Thakur Sudesh Kumar Raunija, Sharad Chandra Sharma, Anil Verma 한국탄소학회 Carbon Letters 9 Pages
한국탄소학회 Carbon Letters 2016, Vol.19 7 57-65 (9 pages)
Isroaniso matrix precursor synthesized from commercially available petroleum pitch was stabilized in air. The influence of oxygen mass gain during stabilization on the yield of matrix precursor was studied. Additionally, the influence of pressure on the yield of the stabilized matrix precursor in a real system was studied. The fourier transform infrared spectrometry (FTIR), thermogravimetric analysis (TGA), yield, yield rate, and yield impact were used to check the effect of stabilization and... -
Phenylethynyl-terminated polyimide, exfoliated graphite nanoplatelets, and the composites: an overview
Donghwan Cho, Lawrence T. Drzal 한국탄소학회 Carbon Letters 11 Pages
한국탄소학회 Carbon Letters 2016, Vol.19 1 1-11 (11 pages)
The dynamic mechanical and thermal properties and the electrical resistivity of xGnP/PETI-5 composites are characterized. The effect of liquid rubber amine-terminated poly(butadiene-co-acrylonitrile) (ATBN)-coated xGnP particles incorporated into epoxy resin on the toughness of xGnP/epoxy composites is examined in terms of its impact on Izod strength. This paper provides an extensive overview from fundamental studies on PETI-5 and xGnP, as well as applied studies on relevant composite materials. -
Bulk graphite: materials and manufacturing process
Sang-Min Lee, Dong-Su Kang and Jea-Seung Roh 한국탄소학회 Carbon Letters 12 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.3 1 135-146 (12 pages)
resistance, electrical conductivity, thermal conductivity, chemical stability, and high-temperature strength, artificial graphite is used across various industries in powder form and bulk form. Artificial graphite of powder form is usually used as anode materials for secondary cells, while artificial graphite of bulk form is used in steelmaking electrode bars, nuclear reactor moderators, silicon ingots for semiconductors, and manufacturing equipment. This study defines artificial graphite as... -
Functionalization of graphene nanoplatelets using sugar azide for graphene/epoxy nanocomposites
Saswata Bose, Lawrence T. Drzal 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.2 5 101-106 (6 pages)
evaluation of its thermo-mechanical performance. Successful functionalization of GnP was confirmed via thermal and spectroscopic study. Raman spectroscopy indicated that the functionalization was on the edge of the graphene sheets; the basal plane was not perturbed as a result of the functionalization. The epoxy/functionalized GnP composite system exhibited an increase in flexural modulus (~18%) and glass transition temperature (~10°C) compared to an un-functionalized GnP based epoxy composite. -
Influence of hot-pressing pressure on the densification of short-carbon-fiber-reinforced, randomly oriented carbon/carbon composite
Thakur Sudesh Kumar Raunija and Sharad Chandra Sharma 한국탄소학회 Carbon Letters 9 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.1 4 25-33 (9 pages)
The prime objective of this research was to study the influence of hot-pressing pressure and matrix-to-reinforcement ratio on the densification of short-carbon-fiber-reinforced, randomly oriented carbon/carbon-composite. Secondary objectives included determination of the physical and mechanical properties of the resulting composite. The ‘hybrid carbon-fiberreinforced mesophase-pitch-derived carbon-matrix’ composite was fabricated by hot pressing. During hot pressing, pressure was varied from 5... -
Morphological optimization of process parameters of randomly oriented carbon/carbon composite
Thakur Sudesh Kumar Raunija, Sushant Krunal Manwatkar, Sharad Chandra Sharma, Anil Verma 한국탄소학회 Carbon Letters 7 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.1 3 25-31 (7 pages)
A microstructure analysis is carried out to optimize the process parameters of a randomly oriented discrete length hybrid carbon fiber reinforced carbon matrix composite. The composite is fabricated by moulding of a slurry into a preform, followed by hot-pressing and carbonization. Heating rates of 0.1, 0.2, 0.3, 0.5, 1, and 3.3°C/min and pressures of 5, 10, 15, and 20 MPa are applied during hot-pressing. Matrix precursor to reinforcement weight ratios of 70:30, 50:50, and 30:70 are also...
