자료유형
발행기관
- 한국탄소학회(145)
- 한국진공학회(37)
- 대한화학회(36)
- 한국광물학회(24)
- 한국결정성장학회(23)
- 한국자기학회(17)
- 한국전기전자재료학회(17)
- 한국재료학회(16)
- 한국세라믹학회(15)
- 한국열환경공학회(14)
- 한국섬유공학회(13)
- 대한기계학회(12)
- 한국고분자학회(11)
- 한국전기화학회(8)
- 한국염색가공학회(7)
- 한국정밀공학회(7)
- 한국청정기술학회(7)
- 한국목재공학회(6)
- 대한전자공학회(5)
- 한국공업화학회(5)
- 한국윤활학회(5)
- 한국해양공학회(5)
- 대한자원환경지질학회(4)
- 대한환경공학회(4)
- 조선대학교 기초과학연구원(4)
- 한국결정학회(4)
- 한국고무학회(4)
- 한국식품과학회(4)
- 한국지반공학회(4)
- 대한수의학회(3)
- 테크노프레스(3)
- 한국광학회(3)
- 한국반도체및디스플레이장비학회(3)
- 한국비파괴검사학회(3)
- 한국식물병리학회(3)
- 한국식품영양과학회(3)
- 한국잠사학회(3)
- 한국현미경학회(3)
- 대한약학회(2)
- 대한용접접합학회(2)
- 대한전기학회(2)
- 인문사회과학기술융합학회(2)
- 한국대학박물관협회(2)
- 한국마이크로전자및패키징학회(2)
- 한국막학회(2)
- 한국미생물생명공학회(2)
- 한국분말야금학회(2)
- 한국생명과학회(2)
- 한국생물공학회(2)
- 한국암석학회(2)
- 한국약제학회(2)
- 한국자동차공학회(2)
- 한국표면공학회(2)
- 한국화학공학회(2)
- 대한가정학회(1)
- 대한디지털의료영상학회(1)
- 대한방사선과학회(1)
- 대한생리학회(1)
- 대한소아치과학회(1)
- 대한약리학회(1)
- 대한지질공학회(1)
- 대한치과기공학회(1)
- 대한치과이식임플란트학회(1)
- 대한화약발파공학회(1)
- 대한화장품학회(1)
- 생화학분자생물학회(1)
- 한국고고학회(1)
- 한국공작기계학회(1)
- 한국구조물진단유지관리공학회(1)
- 한국기계가공학회(1)
- 한국농업기계학회(1)
- 한국분석과학회(1)
- 한국산림바이오에너지학회(1)
- 한국소성가공학회(1)
- 한국습지학회(1)
- 한국안광학회(1)
- 한국안전학회(1)
- 한국어업기술학회(1)
- 한국열처리공학회(1)
- 한국유변학회(1)
- 한국유화학회(1)
- 한국의류산업학회(1)
- 한국의류학회(1)
- 한국인터넷방송통신학회(1)
- 한국자원리싸이클링학회(1)
- 한국추진공학회(1)
- 한국콘크리트학회(1)
- 한국환경보건학회(1)
간행물
- CARBON LETTERS(145)
- 한국진공학회지(36)
- 한국광물학회지(24)
- BULLETIN OF THE KOREAN CHEMICAL SOCIETY(23)
- 한국결정성장학회지(23)
- 한국재료학회지(16)
- 대한화학회지(13)
- 한국자기학회지(13)
- 열환경공학(11)
- 전기전자재료학회논문지(10)
- FIBERS AND POLYMERS(9)
- 대한기계학회론문집. TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS. A. A(9)
- 한국세라믹학회지(8)
- 청정기술(7)
- 폴리머(7)
- 한국염색가공학회지(7)
- 목재공학(6)
- 전기화학회지(6)
- 공업화학(5)
- 윤활학회지(5)
- 한국정밀공학회지(5)
- 한국해양공학회지(5)
- ENVIRONMENTAL ENGINEERING RESEARCH(4)
- JOURNAL OF MAGNETICS(4)
- JOURNAL OF THE CHOSUN NATURAL SCIENCE(4)
- MACROMOLECULAR RESEARCH(4)
- THE KOREAN JOURNAL OF CERAMICS(4)
- TRANSACTIONS ON ELECTRICAL AND ELECTRONIC MATERIALS(4)
- 자원환경지질(4)
- 한국결정학회지(4)
- 한국섬유공학회지(4)
- ELASTOMERS AND COMPOSITES(3)
- JOURNAL OF VETERINARY SCIENCE(3)
- 반도체및디스플레이장비학회지(3)
- 비파괴검사학회지(3)
- 요업학회지(3)
- 전기전자재료학회지= THE JOURNAL OF THE KOREAN INSTITUTE OF ELECTRICAL AND ELECTRONIC MATERIAL ENGINEERS(3)
- 전자공학회논문지. JOURNAL OF THE INSTITUTE OF ELECTRONICS ENGINEERS OF KOREA. SD, 반도체(3)
- 한국식품과학회지(3)
- 한국열환경공학회 학술대회지(3)
- 한국잠사학회지(3)
- 한국전자현미경학회지(3)
- 한국지반공학회논문집(3)
- ARCHIVES OF PHARMACAL RESEARCH : A PUBLICATION OF THE PHARMACEUTICAL SOCIETY OF KOREA(2)
- JOURNAL OF ELECTROCHEMICAL SCIENCE AND TECHNOLOGY(2)
- JOURNAL OF MICROBIOLOGY AND BIOTECHNOLOGY(2)
- JOURNAL OF THE INSTITUTE OF ELECTRONICS ENGINEERS OF KOREA(2)
- KOREAN CHEMICAL ENGINEERING RESEARCH(2)
- THE PLANT PATHOLOGY JOURNAL (2)
- 고문화(2)
- 대한기계학회론문집. TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS. B. B(2)
- 대한용접-접합학회지(2)
- 마이크로전자 및 패키징 학회지(2)
- 멤브레인(2)
- 생명과학회지(2)
- 암석학회지(2)
- 예술인문사회융합멀티미디어논문지(2)
- 한국광학회지(2)
- 한국분말야금학회지(2)
- 한국식품영양과학회지(2)
- 한국자동차공학회논문집(2)
- 한국표면공학회지(2)
- ADVANCES IN ENVIRONMENTAL RESEARCH(1)
- ADVANCES IN MATERIALS RESEARCH(1)
- BIOTECHNOLOGY AND BIOPROCESS ENGINEERING(1)
- FOOD SCIENCE AND BIOTECHNOLOGY(1)
- INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING(1)
- INTERNATIONAL JOURNAL OF THE KOREAN SOCIETY OF PRECISION ENGINEERING(1)
- JOURNAL OF BIOCHEMISTRY AND MOLECULAR BIOLOGY(1)
- JOURNAL OF DENTAL IMPLANT RESEARCH(1)
- JOURNAL OF PHARMACEUTICAL INVESTIGATION(1)
- JOURNAL OF THE OPTICAL SOCIETY OF KOREA(1)
- KOREAN JOURNAL OF DIGITAL IMAGING IN MEDICINE : KJDIM(1)
- STEEL & COMPOSITE STRUCTURES : AN INTERNATIONAL JOURNAL(1)
- THE JOURNAL OF KOREAN VACUUM SCIENCE & TECHNOLOGY(1)
- 대한가정학회지(1)
- 대한기계학회논문집(1)
- 대한생리학회지(1)
- 대한소아치과학회지(1)
- 대한약리학잡지(1)
- 대한치과기공학회지(1)
- 대한화장품학회지(1)
- 바이오시스템공학(1)
- 방사선기술과학(1)
- 분석과학(1)
- 산업안전학회지(1)
- 소성가공(1)
- 식물병연구(1)
- 약제학회지(1)
- 엘라스토머(1)
- 열처리공학회지(1)
- 유변학(1)
- 임산에너지(1)
- 자원리싸이클링 : 한국자원리싸이클링학회지(1)
- 전기학회논문지. THE TRANSACTIONS OF THE KOREAN INSTITUTE OF ELECTRICAL ENGINEERS. C/ C, 전기물성-응용부문(1)
- 전기학회지= THE PROCESSING OF THE INSTITUTE OF ELECTRICAL ENGINEERS(1)
- 지질공학(1)
- 콘크리트학회논문집(1)
- 한국고고학보(1)
- 한국공작기계기술학회지(1)
- 한국구조물진단유지관리공학회 논문집(1)
- 한국기계가공학회지(1)
- 한국생물공학회지(1)
- 한국습지학회지(1)
- 한국안광학회지(1)
- 한국어업기술학회지(1)
- 한국영양식량학회지(1)
- 한국유화학회지(1)
- 한국의류산업학회지(1)
- 한국의류학회지(1)
- 한국인터넷방송통신학회 논문지(1)
- 한국지반공학회지(1)
- 한국추진공학회지(1)
- 한국환경위생학회지(1)
- 화약-발파(1)
-
Microstructural changes of polyacrylonitrile-based carbon fibers (T300 and T700) due to isothermal oxidation (1): focusing on morphological changes using scanning electron microscopy
Seong-Moon Oh, Sang-Min Lee, Dong-Su Kang, Jae-Seung Roh 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2016, Vol.18 3 18-23 (6 pages)
Polyacrylonitrile (PAN)-based carbon fibers have high specific strength, elastic modulus, thermal resistance, and thermal conductivity. Due to these properties, they have been increasingly widely used in various spheres including leisure, aviation, aerospace, military, and energy applications. However, if exposed to air at high temperatures, they are oxidized, thus weakening the properties of carbon fibers and carbon composite materials. As such, it is important to understand the oxidation... -
One-step synthesis of dual-transition metal substitution on ionic liquid based N-doped mesoporous carbon for oxygen reduction reaction
Ulziidelger Byambasuren, Yukwon Jeon, Dorjgotov Altansukh, Yunseong Ji, Yong-Gun Shul 한국탄소학회 Carbon Letters 12 Pages
한국탄소학회 Carbon Letters 2016, Vol.17 No.1 8 53-64 (12 pages)
promoted by the dual transition metals of iron and cobalt (Fe, Co), which were incorporated into the N-doped carbons lattice by subsequently heat treatments. All the prepared carbons were characterized by via transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). To evaluate the activities of synthesized doped carbons, linear sweep was recorded in an acidic solution to compare the ORR catalytic activities values for the use in the PEMFC syste... -
Rate-capability response of graphite anode materials in advanced energy storage systems: a structural comparison
Umer Farooq, Chil-Hoon Doh, Syed Atif Pervez, Doo-Hun Kim, Sang-Hoon Lee, Mohsin Saleem, Seong-Ju Sim, Jeong-Hee Choi 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2016, Vol.17 No.1 6 39-44 (6 pages)
A comprehensive morphological and physical characterization was carried out for these graphite samples via X-ray diffraction and scanning electron microscopy. Later, the electrochemical performance was analyzed using galvanostatic charge/discharge testing and the galvanostatic intermittent titration technique for these graphite samples as negative electrode materials in battery operation. The results demonstrated that a material having a higher crystalline order exhibits enhanced electrochemical... -
Influence of oxidative atmosphere of the electron beam irradiation on cyclization of PAN-based fibers
Hye Kyoung Shin, Mira Park, Hak-Yong Kim, Soo-Jin Park 한국탄소학회 Carbon Letters 3 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.3 10 219-221 (3 pages)
In the Fourier-transform infrared spectroscopy analysis, the PAN fibers stabilized by EBI under an oxygen atmosphere exhibited a greater decrease in the peak intensity at 2244 cm-1 (C≡N vibration) and a greater increase in the peak intensity at 1628 cm-1 (C=N absorption) than the corresponding PAN fibers stabilized under an air atmosphere. From the X-ray diffraction analysis it was found that oxygen uptake in PAN fibers leads to an increase in the amorphous region, produced by cyclization. -
Micro-sized carbon with dimple patterns prepared using an electro-spray method
Mi-Seon Park, Young-Seak Lee 한국탄소학회 Carbon Letters 4 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.3 9 215-218 (4 pages)
Carbon micro particles with dimple patterns were produced by electro-spraying a solution of pitch in tetrahydrofuran. Particle formation depended on separation in an electrical field and volatilization of the solvent. More than 80% of the obtained carbon exhibited an average particle size of less than 50 μm. X-ray diffraction analysis suggests that the carbon with dimple patterns has increased crystallinity after heat treatment. -
Effects of cross-linking methods for polyethylene-based carbon fibers: review
Kwan-Woo Kim, Hye-Min Lee, Jeong-Hun An, Byoung-Suhk Kim, Byung-Gak Min, Shin-Jae Kang, Kay-Hyeok An, Byung-Joo Kim 한국탄소학회 Carbon Letters 24 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.3 2 147-170 (24 pages)
In recent decades, there has been an increasing interest in the use of carbon fiber reinforced plastic (CFRP) in aerospace, renewable energy and other industries, due to its low weight and relatively good mechanical properties compared with traditional metals. However, due to the high cost of petroleum-based precursors and their associated processing costs, CF remains a specialty product and as such has been limited to use in high-end aerospace, sporting goods, automotive, and specialist... -
Hydrogen storage capacity of highly porous carbons synthesized from biomass-derived aerogels
Yong-Ki Choi, Soo-Jin Park 한국탄소학회 Carbon Letters 5 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.2 9 127-131 (5 pages)
to enhance the specific surface area and microporosity. The micro-structural properties and morphologies were measured by X-ray diffraction and scanning electron microscopy, respectively. The specific surface area and microporosity were investigated by N2/77 K adsorption-desorption isotherms using the Brunauer-Emmett-Teller method and Barrett-Joyner-Halenda equation, respectively. Hydrogen storage capacity was dependent on the activation temperature. The highest capacity of 2.7 wt% at 77 K and 1... -
Stabilization of pitch-based carbon fibers accompanying electron beam irradiation and their mechanical properties
Mi-Seon Park, Yoonyoung Ko, Min-Jung Jung, Young-Seak Lee 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.2 8 121-126 (6 pages)
Carbon fibers are prepared by stabilizing pitch fibers accompanying electron beam (E-beam) irradiation. The carbon fibers pretreated by E-beam irradiation achieve a higher stabilization index than the carbon fibers that are only heat-stabilized. In addition, the carbon fibers subjected to E-beam irradiation in the stabilization step exhibit a comparable tensile strength to that of general purpose carbon fibers. The carbon fibers pretreated with an absorbed dose of 3000 kGy have a tensile... -
Activated carbons prepared from mixtures of coal tar pitch and petroleum pitch and their electrochemical performance as electrode materials for electric double-layer capacitor
Eunji Lee, Soon Hyung Kwon, Poo Reum Choi, Ji Chul Jung, Myung-Soo Kim 한국탄소학회 Carbon Letters 8 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.2 2 78-85 (8 pages)
Activated carbons (ACs) were prepared by activation of coal tar pitch (CTP) in the range of 700°C-1000°C for 1-4 h using potassium hydroxide (KOH) powder as the activation agent. The optimal activation conditions were determined to be a CTP/KOH ratio of 1:4, activation temperature of 900°C, and activation time of 3 h. The obtained ACs showed increased pore size distribution in the range of 1 to 2 nm and the highest specific capacitance of 122 F/g in a two-electrode system with an organic...


전체 선택해제

총


