학지사 뉴논문

총 792건 검색

본문검색 결과만 보기

정확도순

최신순

등재순

발행기간

전체
최근 1년
최근 3년
직접입력

적용하기

본문검색

포함

제외

10개씩

451.

Effect of the surface modification using MWCNTs with different L/D by two different methods of deposition on the IFSS of single carbon fiber-epoxy resin composite

Minerva L. Herrera-Sosa, Alex Valadez-Gonz?lez, Humberto V?zquez-Torres, Pierre G. Mani-Gonz?lez, Pedro J. Herrera-Franco 한국탄소학회 Carbon Letters 10 Pages

한국탄소학회 Carbon Letters 2017, Vol.24 3 18-27 (10 pages)

Minerva L. Herrera-Sosa, Alex Valadez-Gonz?lez, Humberto V?zquez-Torres, Pierre G. Mani-Gonz?lez, Pedro J. Herrera-Franco 저
...
- 3,000원
Multiwall carbon nanotubes (MWCNT) with two different (L/D) aspect ratios (7±2 μm/140±30 nm and 0.5?2 μm/8?15 nm) were surface treated using nitric acid (HNO3) and polyethyleneimine (PEI) prior to their deposition on carbon fibers (CF). Before the hierarchical reinforcement with CF-MWCNT, the CFs were treated with 3-glycidoxypropyltrimethoxysilane, a coupling agent (Z6040) and with poly(amidoamine) (PAMAM) a dendrimer containing an ethylenediamine core and amine surface groups. The MWCNT...
452.

Thermo-electrical properties of randomly oriented carbon/carbon composite

Thakur Sudesh Kumar Raunija, N. Supriya 한국탄소학회 Carbon Letters 11 Pages

한국탄소학회 Carbon Letters 2017, Vol.22 3 25-35 (11 pages)

Thakur Sudesh Kumar Raunija, N. Supriya 저
...
- 4,000원
The aim of the work was to investigate the thermo-electrical properties of low cost and rapidly produced randomly oriented carbon/carbon (C/C) composite. The composite body was fabricated by combining the high-pressure hot-pressing (HP) method with the lowpressure impregnation thermosetting carbonization (ITC) method. After the ITC method step selected samples were graphitized at 3000°C. Detailed characterization of the samples’ physical properties and thermal properties, including thermal...
453.

The impact fracture behaviors of CFRP/EVA composites by drop-weight impact test

Sun-Ho Go, Hong-Gun Kim, Hee-Jae Shin, Min-Sang Lee, Hyun-Gyung Yoon, Lee-Ku Kwac 한국탄소학회 Carbon Letters 10 Pages

한국탄소학회 Carbon Letters 2017, Vol.21 4 23-32 (10 pages)

Sun-Ho Go, Hong-Gun Kim, Hee-Jae Shin, Min-Sang Lee, Hyun-Gyung Yoon, Lee-Ku Kwac 저
...
- 3,000원
A drop weight impact test was conducted in this study to analyze the mechanical and thermal properties caused by the changes in the ratio of carbon fiber reinforced plastic (CFRP) to ethylene vinyl acetate (EVA) laminations. The ratios of CFRP to EVA were changed from 10:0 (pure CFRP) to 9:1, 8:2, 6:4, and 5:5 by manufacturing five different types of samples, and at the same time, the mechanical/thermal properties were analyzed with thermo-graphic images. As the ratio of the CFRP lamination was...
454.

Influence of laminated orientation on the mechanical and thermal characteristics of carbon-fiber reinforced plastics

Hee-Jae Shin, Lee-Ku Kwac, Min-Sang Lee, Hong-Gun Kim 한국탄소학회 Carbon Letters 6 Pages

한국탄소학회 Carbon Letters 2015, Vol.16 No.4 3 241-246 (6 pages)

Hee-Jae Shin, Lee-Ku Kwac, Min-Sang Lee, Hong-Gun Kim 저
...
- 3,000원
Rapid industrial development in recent times has increased the demand for light-weight materials with high strength and structural integrity. In this context, carbon fiber-reinforced plastic (CFRP) composite materials are being extensively used. However, laminated CFRPs develop faults during impact because CFRPs are composed of mixed carbon fiber and epoxy. Moreover, their fracturing behavior is very complicated and difficult to interpret. In this paper, the effect of the direction of lamination...
455.

Electrochemical synthesis of nanosized hydroxyapatite/graphene composite powder

Vesna Mi?kovi?-Stankovi?, Sanja Erakovi?, Ana Jankovi?, Maja Vuka?inovi?-Sekuli?, Miodrag Mitri?, Young Chan Jung, Soo Jin Park, Kyong 한국탄소학회 Carbon Letters 8 Pages

한국탄소학회 Carbon Letters 2015, Vol.16 No.4 2 233-240 (8 pages)

Vesna Mi?kovi?-Stankovi?, Sanja Erakovi?, Ana Jankovi?, Maja Vuka?inovi?-Sekuli?, Miodrag Mitri?, Young Chan Jung, Soo Jin Park, Kyong 저
...
- 3,000원
Electrochemical synthesis was employed to prepare a novel hydroxyapatite/graphene (HAP/ Gr) composite powder suitable for medical applications as a hard tissue implant (scaffold). The synthesis was performed in a homogeneous dispersion containing Na2H2EDTA·2H2O, NaH2PO4 and CaCl2 with a Ca/EDTA/PO4 3? concentration ratio of 0.25/0.25/0.15M, along with 0.01 wt% added graphene nanosheets, at a current density of 137 mA cm?2 and pH value of 9.0. The field emission scanning electron microscopy and...
456.

The effects of stacking sequence on the penetration-resistant behaviors of T800 carbon fiber composite plates under low-velocity impact loading

Furqan Ahmad, Jung-Wuk Hong, Heung Soap Choi, Soo-Jin Park, Myung Kyun Park 한국탄소학회 Carbon Letters 9 Pages

한국탄소학회 Carbon Letters 2015, Vol.16 No.2 6 107-115 (9 pages)

Furqan Ahmad, Jung-Wuk Hong, Heung Soap Choi, Soo-Jin Park, Myung Kyun Park 저
...
- 3,000원
Impact damages induced by a low-velocity impact load on carbon fiber reinforced polymer (CFRP) composite plates fabricated with various stacking sequences were studied experimentally. The impact responses of the CFRP composite plates were significantly affected by the laminate stacking sequences. Three types of specimens, specifically quasi-isotropic, unidirectional, and cross-ply, were tested by a constant impact carrying the same impact energy level. An impact load of 3.44 kg, corresponding to...
457.

Adsorption of volatile organic compounds using activated carbon fiber filter in the automobiles

Hyung Suk Moon, In Soo Kim, Sin Jae Kang, Seung Kon Ryu 한국탄소학회 Carbon Letters 7 Pages

한국탄소학회 Carbon Letters 2014, Vol.15 No.3 8 203-209 (7 pages)

Hyung Suk Moon, In Soo Kim, Sin Jae Kang, Seung Kon Ryu 저
...
- 3,000원
The adsorption of volatile organic compounds (VOCs) was carried out using an activated carbon fiber (ACF) filter in an automobile. The adsorption capacities of formaldehyde, toluene, and benzene on an ACF filter were far better than those of a polypropylene (PP) mat filter and combined (PP+activated carbon) mat filter by batch adsorption in a gas bag. In a continuous flow of air containing toluene vapor through an ACF packed bed, the breakpoint time was very long, the length of the unused bed...
458.

Effect of stacking sequence on the flexural and fracture properties of carbon/basalt/epoxy hybrid composites

Jae Il Lim, Kyong Yop Rhee, Hyun Ju Kim, Dong Ho Jung 한국탄소학회 Carbon Letters 4 Pages

한국탄소학회 Carbon Letters 2014, Vol.15 No.2 9 125-128 (4 pages)

Jae Il Lim, Kyong Yop Rhee, Hyun Ju Kim, Dong Ho Jung 저
...
- 1,500원
In this study, the effect of stacking sequence on the flexural and fracture properties of carbon/ basalt/epoxy hybrid composites was investigated. Two types of carbon/basalt/epoxy hybrid composites with a sandwich form were fabricated: basalt skin-carbon core (BSCC) composites and carbon skin-basalt core (CSBC) composites. Fracture tests were conducted and the fracture surfaces of the carbon/basalt/epoxy hybrid composites were then examined using scanning electron microscopy (SEM). The results...
459.

Superhydrophobic carbon-based materials: a review of synthesis, structure, and applications

Long-Yue Meng, Soo-Jin Park 한국탄소학회 Carbon Letters 16 Pages

한국탄소학회 Carbon Letters 2014, Vol.15 No.2 5 89-104 (16 pages)

Long-Yue Meng, Soo-Jin Park 저
...
- 4,500원
Materials with appropriate surface roughness and low surface energy can form superhydrophobic surfaces, displaying water contact angles greater than 150°. Superhydrophobic carbon-based materials are particularly interesting due to their exceptional physicochemical properties. This review discusses the various techniques used to produce superhydrophobic carbon-based materials such as carbon fibers, carbon nanotubes, graphene, amorphous carbons, etc. Recent advances in emerging fields such as...
460.

Morphological optimization of process parameters of randomly oriented carbon/carbon composite

Thakur Sudesh Kumar Raunija, Sushant Krunal Manwatkar, Sharad Chandra Sharma, Anil Verma 한국탄소학회 Carbon Letters 7 Pages

한국탄소학회 Carbon Letters 2014, Vol.15 No.1 3 25-31 (7 pages)

Thakur Sudesh Kumar Raunija, Sushant Krunal Manwatkar, Sharad Chandra Sharma, Anil Verma 저
...
- 3,000원
A microstructure analysis is carried out to optimize the process parameters of a randomly oriented discrete length hybrid carbon fiber reinforced carbon matrix composite. The composite is fabricated by moulding of a slurry into a preform, followed by hot-pressing and carbonization. Heating rates of 0.1, 0.2, 0.3, 0.5, 1, and 3.3°C/min and pressures of 5, 10, 15, and 20 MPa are applied during hot-pressing. Matrix precursor to reinforcement weight ratios of 70:30, 50:50, and 30:70 are also...

한주간 이슈검색어