학지사 뉴논문

총 840건 검색

본문검색 결과만 보기

정확도순

최신순

등재순

발행기간

전체
최근 1년
최근 3년
직접입력

적용하기

본문검색

포함

제외

10개씩

01.

Flexural, electrical, thermal and electromagnetic interference shielding properties of xGnP and carbon nanotube filled epoxy hybrid nanocomposites

Young Sil Lee, Yeon Ho Park, Kwan Han Yoon 한국탄소학회 Carbon Letters 6 Pages

한국탄소학회 Carbon Letters 2017, Vol.24 6 41-46 (6 pages)

Young Sil Lee, Yeon Ho Park, Kwan Han Yoon 저
...
- 3,000원
was almost zero. The flexural modulus of the CNT-xGnP based epoxy composite continuously increased to 3.32 GPa with combined filler content up to 10 wt% while that of the CNT based epoxy composites slightly decreased to 1.96 GPa at 4 wt% CNT, and dropped to 1.57 GPa at 5 wt% loading, which is lower than that of epoxy. The CNT and CNT-xGnP samples had the same EMI SE at the same surface resistivity, because samples with the same surface conductivity have the same amount of the charge carriers.
02.

Effect of the surface modification using MWCNTs with different L/D by two different methods of deposition on the IFSS of single carbon fiber-epoxy resin composite

Minerva L. Herrera-Sosa, Alex Valadez-Gonz?lez, Humberto V?zquez-Torres, Pierre G. Mani-Gonz?lez, Pedro J. Herrera-Franco 한국탄소학회 Carbon Letters 10 Pages

한국탄소학회 Carbon Letters 2017, Vol.24 3 18-27 (10 pages)

Minerva L. Herrera-Sosa, Alex Valadez-Gonz?lez, Humberto V?zquez-Torres, Pierre G. Mani-Gonz?lez, Pedro J. Herrera-Franco 저
...
- 3,000원
Multiwall carbon nanotubes (MWCNT) with two different (L/D) aspect ratios (7±2 μm/140±30 nm and 0.5?2 μm/8?15 nm) were surface treated using nitric acid (HNO3) and polyethyleneimine (PEI) prior to their deposition on carbon fibers (CF). Before the hierarchical reinforcement with CF-MWCNT, the CFs were treated with 3-glycidoxypropyltrimethoxysilane, a coupling agent (Z6040) and with poly(amidoamine) (PAMAM) a dendrimer containing an ethylenediamine core and amine surface groups. The MWCNT...
03.

Mechanical and electrical properties of epoxy resin/epoxidized castor oil/carbon fiber cloth composites

Fan-Long Jin, Heng Zhang, Shan-Shan Yao, Soo-Jin Park 한국탄소학회 Carbon Letters 5 Pages

한국탄소학회 Carbon Letters 2017, Vol.22 12 105-109 (5 pages)

Fan-Long Jin, Heng Zhang, Shan-Shan Yao, Soo-Jin Park 저
...
- 1,500원
Carbon fibers (CFs) have a unique combination of outstanding mechanical, physical, and chemical properties and are among the materials most frequently used in the preparation of a large variety of composites [1-5]. CF-reinforced polymer composites have been widely used in many advanced technological fields, such as aerospace, engineering, sporting goods, automobiles, and marine industry during the past few decades due to their excellent properties, including high strength-to-weight ratios, light...
04.

EMI shielding effectiveness and mechanical properties of MWCNTs-reinforced biodegradable epoxy matrix composites

Yoon-Ji Yim, Dong Chul Chung, Soo-Jin Park 한국탄소학회 Carbon Letters 6 Pages

한국탄소학회 Carbon Letters 2017, Vol.22 4 36-41 (6 pages)

Yoon-Ji Yim, Dong Chul Chung, Soo-Jin Park 저
...
- 3,000원
B-epoxy composites reinforced with multi-walled carbon nanotubes (MWCNTs/B-epoxy) were examined by employing dynamic mechanical analysis, critical stress intensity factor (KIC) tests, and impact strength tests. The electromagnetic interference shielding effectiveness (EMI-SE) of the composites was evaluated using reflection and absorption methods. Mechanical properties of MWCNTs/B-epoxy were enhanced with an increase in the MWCNT content, whereas they deteriorated when the MWCNT content was >5...
05.

Mechanical properties of epoxy composites reinforced with ammonia-treated graphene oxides

Mi-Seon Park, Sangmin Lee, Young-Seak Lee 한국탄소학회 Carbon Letters 7 Pages

한국탄소학회 Carbon Letters 2017, Vol.21 1 1-7 (7 pages)

Mi-Seon Park, Sangmin Lee, Young-Seak Lee 저
...
- 3,000원
on epoxy resin were investigated. Ammonia solutions of different concentrations (14?28%) were used to modify GO. Nitrogen functional groups were introduced on the GO surfaces without significant structural changes. The ammonia-treated GO-based epoxy composites exhibited interesting changes in their mechanical properties related to the presence of nitrogen functional groups, particularly amine (C-NH2) groups on the GO surfaces. The highest tensile and impact strength values were 42.1 MPa and 12.3...
06.

Effect of fiber-matrix adhesion on the fracture behavior of a carbon fiber reinforced thermoplastic-modified epoxy matrix

H.J. Carrillo-Escalante, A. ?lvarez-Castillo, A. Valadez-Gonz?lez, P. J. Herrera-Franco 한국탄소학회 Carbon Letters 10 Pages

한국탄소학회 Carbon Letters 2016, Vol.19 6 47-56 (10 pages)

H.J. Carrillo-Escalante, A. ?lvarez-Castillo, A. Valadez-Gonz?lez, P. J. Herrera-Franco 저
...
- 3,000원
thermoplastic-modified epoxy resin reinforced with continuous carbon fibers for two levels of fiber-matrix adhesion was performed. A carbon fiber with commercial sizing was used and also treated with a known silane, (3-glycidoxy propyl trimethoxysilane) coupling agent. Toughness was determined using the double cantilever test, together with surface analysis after failure using scanning electron microscope. The presence of polysulfone particles improved the fracture behavior of the composite, but...
07.

Effect of surface treatment of graphene nanoplatelets for improvement of thermal and electrical properties of epoxy composites

Minjae Kim, Yeongseon Kim, Sung Hyeon Baeck and Sang Eun Shim 한국탄소학회 Carbon Letters 7 Pages

한국탄소학회 Carbon Letters 2015, Vol.16 No.1 5 34-40 (7 pages)

Minjae Kim, Yeongseon Kim, Sung Hyeon Baeck and Sang Eun Shim 저
...
- 3,000원
of epoxy/graphene nanoplatelets (GNPs), surface modifications of GNPs are conducted using silane coupling agents. Three silane coupling agents, i.e. 2-(3,4-epoxycyclohexyl)-ethyltrimethoxysilane (ETMOS), 3-glycidoxypropyltriethoxysilane (GPTS), and 3-glycidoxypropyltrimethoxysilane (GPTMS), were used. Among theses, GPTMS exhibits the best modification performance for fabricating GNP-incorporated epoxy composites. The effect of the silanization is evaluated using transmission electron microscopy...
08.

Properties of multi-walled carbon nanotube reinforced epoxy composites fabricated by using sonication and shear mixing

Min Ye Koo, Hon Chung Shin, Won-Seok Kim and Gyo Woo Lee 한국탄소학회 Carbon Letters 7 Pages

한국탄소학회 Carbon Letters 2014, Vol.15 No.4 4 255-261 (7 pages)

Min Ye Koo, Hon Chung Shin, Won-Seok Kim and Gyo Woo Lee 저
...
- 3,000원
Multi-walled carbon nanotube reinforced epoxy composites were fabricated using shear mixing and sonication. The mechanical, viscoelastic, thermal, and electrical properties of the fabricated specimens were measured and evaluated. From the images and the results of the measurements of tensile strengths, the specimens having 0.6 wt% nanotube content showed better dispersion and higher strength than those of the other specimens. The Young’s moduli of the specimens increased as the nanotube filler...
09.

Effect of stacking sequence on the flexural and fracture properties of carbon/basalt/epoxy hybrid composites

Jae Il Lim, Kyong Yop Rhee, Hyun Ju Kim, Dong Ho Jung 한국탄소학회 Carbon Letters 4 Pages

한국탄소학회 Carbon Letters 2014, Vol.15 No.2 9 125-128 (4 pages)

Jae Il Lim, Kyong Yop Rhee, Hyun Ju Kim, Dong Ho Jung 저
...
- 1,500원
In this study, the effect of stacking sequence on the flexural and fracture properties of carbon/ basalt/epoxy hybrid composites was investigated. Two types of carbon/basalt/epoxy hybrid composites with a sandwich form were fabricated: basalt skin-carbon core (BSCC) composites and carbon skin-basalt core (CSBC) composites. Fracture tests were conducted and the fracture surfaces of the carbon/basalt/epoxy hybrid composites were then examined using scanning electron microscopy (SEM). The results...
10.

Effect of chemically reduced graphene oxide on epoxy nanocomposites for flexural behaviors

Seul-Yi Lee, Mi-Hwa Chong, Mira Park, Hak-Yong Kim, Soo-Jin Park 한국탄소학회 Carbon Letters 4 Pages

한국탄소학회 Carbon Letters 2014, Vol.15 No.1 9 67-70 (4 pages)

Seul-Yi Lee, Mi-Hwa Chong, Mira Park, Hak-Yong Kim, Soo-Jin Park 저
...
- 1,500원
the mechanical properties of the epoxy nanocomposites. It was found that the presence of RGO improved both flexural strength and modulus of the epoxy nanocomposites till the RGO loading reached 0.4 wt%, and then decreased. The optimum loading achieved about 24.5 and 25.7% improvements, respectively, compared to the neat-epoxy composites. The observed mechanical reinforcement might be an enhancement of mechanical interlocking between the epoxy matrix and RGO due to the unique planar structures.

한주간 이슈검색어