자료유형
-
Influence of hot-pressing pressure on the densification of short-carbon-fiber-reinforced, randomly oriented carbon/carbon composite
Thakur Sudesh Kumar Raunija and Sharad Chandra Sharma 한국탄소학회 Carbon Letters 9 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.1 4 25-33 (9 pages)
The prime objective of this research was to study the influence of hot-pressing pressure and matrix-to-reinforcement ratio on the densification of short-carbon-fiber-reinforced, randomly oriented carbon/carbon-composite. Secondary objectives included determination of the physical and mechanical properties of the resulting composite. The ‘hybrid carbon-fiberreinforced mesophase-pitch-derived carbon-matrix’ composite was fabricated by hot pressing. During hot pressing, pressure was varied from 5... -
The Influence of Stress-induced Densification and Centrifuge Model Preparation Method for Soil Liquefaction
박성식, Park. Sung-Sik 한국지반공학회 韓國地盤工學會論文集 8 Pages
한국지반공학회 韓國地盤工學會論文集 2006, Vol.22 No.11 151-158 (8 pages)
균일한 모래지반을 이용한 원심모형실험에서는 지표면근처에서 액상화가 발생한 후에 점차적으로 깊은 곳으로 전파되는 경향을 보였다. 이와 같은 현상은 실내실험에서 상재하중효과를 고려했을 때 관찰되는 액상화현상과 상반되는 것처럼 보인다. 그러나, 응력증가에 따른 모형지반의 상대밀도증가가 구속압증가에 따른 액상화저항감소를 상쇄시킨다. 이와 같은 응력증가에 따른 상대밀도증가는 실제 원심모형실험에서 발생하고 있으나, 모형지반성형법에서는 고려되고 있지 않다. 따라서, 본 논문에서는 원심모형실험에서 발생할 수... -
IRRADIATION TEST OF MOX FUEL IN THE HALDEN REACTOR AND THE ANALYSIS OF MEASURED DATA WITH THE FUEL PERFORMANCE CODE COSMOS
WIESENACK. WOLFGANG, LEE. BYUNG-HO, SOHN. DONG-SEONG 한국원자력학회 Nuclear engineering and technology : an international journal of the Korean Nuclear Society 10 Pages
한국원자력학회 Nuclear engineering and technology : an international journal of the Korean Nuclear Society 2005, Vol.37 No.4 317-326 (10 pages)
-
Carbon/Carbon Composite by Pack-cementation Method
J.I.KIM, I.S.Oh, H.J.Joo 한국탄소학회 Carbon Letters 10 Pages
한국탄소학회 Carbon Letters 2001, Vol.2 No.1 5 27-36 (10 pages)
21세기에는 에너지의 고갈과 더불어 고도로 발달한 산업환경으로 인하여 재료의 경량화, 고성능화가 촉진되고 있다. 또한 우주산업과 운송산업은 방송, 통신산업과 더불어 가장 크게 성장할 것으로 예측된다. 이러한 우주산업의 재료들과 초고속 운송시스켐의 재료들이 CFRC가 내열, 구조재료로서 각광을 받고 있다[1-4].그러나 탄소재료는 500\'C 정도의 낮은 온도에서 산소와 급격히 반응하여 burn-off되는 심각한 결전을 가지고 있으므로 CFRC를 산화환겨에서 사용하기 위해서 수많은 연구가 수행되었다[5-8]. -
Yield enhancement of matrix precursor in short carbon fiber reinforced randomly oriented carbon/carbon composite
Thakur Sudesh Kumar Raunija, Sharad Chandra Sharma, Anil Verma 한국탄소학회 Carbon Letters 9 Pages
한국탄소학회 Carbon Letters 2016, Vol.19 7 57-65 (9 pages)
for a duration of 5 h could withstand almost two-fold greater hot-pressing pressure without resulting in exudation as compared to that of a 1 h stabilized matrix precursor. The enhanced hot-pressing pressure significantly improved the yield of the matrix precursor. As a consequence, the densification and mechanical properties were increased significantly. Further, the matrix precursor stabilized for a duration of 20 h or more failed to provide proper and uniform binding of the reinforcement. -
Morphological optimization of process parameters of randomly oriented carbon/carbon composite
Thakur Sudesh Kumar Raunija, Sushant Krunal Manwatkar, Sharad Chandra Sharma, Anil Verma 한국탄소학회 Carbon Letters 7 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.1 3 25-31 (7 pages)
give bloating-free, fine microstructure compacts. The compacts fabricated at higher pressure have displayed side oozing of molten pitch and discrete length carbon fibers. The microstructure of the compacts fabricated at low pressure shows a lack of densification. The compacts with low matrix precursor to reinforcement weight ratios have insufficient bonding agent to bind the reinforcement whereas the higher matrix precursor to reinforcement weight ratio results in a plaster-like structure. Based... -
점증하중을 받는 사질토 지반의 조밀화에 대한 유한요소해석
한경제 한국지반공학회 韓國地盤工學會論文集 7 Pages
한국지반공학회 韓國地盤工學會論文集 2000, Vol.16 No.6 79-85 (7 pages)
본 논문에서는 사질토 지반에 일정기간 계속하여 증가되는 단계별 하중이 작용할 때 발생할수 있는 지반의 밀도화 현상을 hyperbolic model의 매개변수 변화를 고려한 방법으로 유한요소법에 의한 수치적 침하해석에 반영해 주었다. 이를 위해 사질토의 상대밀도별 삼축압축실험을 실시하여 매개변수를 산정하였으며, 이를 토대로 각각의 상대밀도의 변화에 따른 매개변수값을 Lagrange의 다항식 수치보간법으로 프로그램에 반영하였다. 또한 유한요소프로그램 내에서 요소의 체적을 계산하고 체적의 변화를 상대밀도 개념으로... -
표면파시험과 공진주시험을 이용한 사질토지반 개량평가 시스템의 개발
김동수, 박형춘, 김성인 한국지반공학회 韓國地盤工學會論文集 12 Pages
한국지반공학회 韓國地盤工學會論文集 1999, Vol.15 No.1 41-52 (12 pages)
다짐 전.후의 지반개량정도와 개량깊이를 평가하기 위하여 일반적으로 SPT와 CPT가 많이 사용된다. 두 방법 모두 일점시험으로서 대규모 현장에서 사용될 경우 매우 많은 시간을 필요로 하며, 지반종류와 실험 숙련도에 따라 시험결과가 영향을 받는다. 본 논문에서는 표면파시험과 공진주시험결과를 결합하여 다짐 전.후의 지반개량정도와 개량깊이를 평가하는 방법을 제안하였다. 표면파 시험은 다짐 전.후의 지반의 전단파속도주상도를 회득하는데 사용되며, 공진주시험은 단일상관관계를 가지는 정규다짐 화된 전단파속도와 밀도와의...


전체 선택해제

총


