자료유형
전체 선택해제
총 74건 검색
본문검색 결과만 보기
-
Effect of the surface modification using MWCNTs with different L/D by two different methods of deposition on the IFSS of single carbon fiber-epoxy resin composite
Minerva L. Herrera-Sosa, Alex Valadez-Gonz?lez, Humberto V?zquez-Torres, Pierre G. Mani-Gonz?lez, Pedro J. Herrera-Franco 한국탄소학회 Carbon Letters 10 Pages
한국탄소학회 Carbon Letters 2017, Vol.24 3 18-27 (10 pages)
surface morphology after the MWCNT deposition were analyzed using SEM, which revealed a higher density and uniform coverage for the PAMAM-treated CF and the short MWCNTs. The interfacial adhesion of the composite materials was evaluated using the single fiber fragmentation technique. The results indicated an improvement in the interfacial shear strength with the addition of the short-MWCNTs treated with acid solutions and grafted onto the surface of the CF fiber using electrostatic attraction. -
EMI shielding effectiveness and mechanical properties of MWCNTs-reinforced biodegradable epoxy matrix composites
Yoon-Ji Yim, Dong Chul Chung, Soo-Jin Park 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2017, Vol.22 4 36-41 (6 pages)
MWCNTs/B-epoxy) were examined by employing dynamic mechanical analysis, critical stress intensity factor (KIC) tests, and impact strength tests. The electromagnetic interference shielding effectiveness (EMI-SE) of the composites was evaluated using reflection and absorption methods. Mechanical properties of MWCNTs/B-epoxy were enhanced with an increase in the MWCNT content, whereas they deteriorated when the MWCNT content was >5 parts per hundred resin (phr). This can likely be attributed to the... -
Composite Materials with MWCNTs and Conducting Polymer Nanorods and their Application as Supercapacitors
Liua. Lichun, Yoo. Sang-Hoon, Park. Sung-Ho 한국전기화학회 Journal of electrochemical science and technology 6 Pages
한국전기화학회 Journal of electrochemical science and technology 2010, Vol.1 No.1 25-30 (6 pages)
-
A Study on the Immobilization of Biomolecules on Poly(acrylic acid)-grafted MWCNTs Prepared by Radiation-Induced Graft Polymerization
정찬희, 이병민, 황인태, 최재학, 노영창, 홍성권, Jung. Chan-Hee, Lee. Byoung-Min, Hwang. In-Tae, Choi. Jae-Hak, Nho. Young-Chang, Hong. Sung-Kwon 한국고분자학회 폴리머 4 Pages
한국고분자학회 폴리머 2010, Vol.34 No.2 150-153 (4 pages)
본 연구에서는 방사선에 의한 그래프트 중합을 이용하여 생체분자가 고정화된 다중벽탄소나노튜브 (MWCNT)를 제조하였다. 생체분자의 고정화를 위하여 MWCNT에 아크릴 산을 그래프트 중합하였다. 열중량분석과 라만 분석을 통하여 MWCNT에 폴리(아크릴 산)이 효과적으로 그래프트 중합되었음을 확인하였다. 폴리(아크릴 산)이 그래프트 된 MWCNT에 DNA와 단백질과 같은 생체분자들을 고정화하였다. X-선 광전자 분광법과 형광분석을 통하여 생체분자들이 성공적으로 MWCNT에 도입되었음이 확인되었다. -
Electromagnetic Interference Shielding Effectiveness of Electroless Nickel-plated MWCNTs/CFs-reinforced HDPE Matrix Composites
Choi. Woong-Ki, Hong. Myung-Sun, Lee. Hae-Seong, An. Kay-Hyeok, Bang. Joon-Hyuk, Lee. Young Sil, Kim. Byung-Joo 대한화학회 Bulletin of the Korean Chemical Society 4 Pages
대한화학회 Bulletin of the Korean Chemical Society 2014, Vol.35 No.2 597-600 (4 pages)
-
Preparation of MWCNT/TiO2 Composites by Using MWCNTs and Titanium(IV) Alkoxide Precursors in Benzene and their Photocatalytic Effect and Bactericidal Activity
Oh. Won-Chun, Zhang. Feng-Jun, Chen. Ming-Liang 대한화학회 Bulletin of the Korean Chemical Society 6 Pages
대한화학회 Bulletin of the Korean Chemical Society 2009, Vol.30 No.11 2637-2642 (6 pages)
-
Highly Homogeneous Carbon Nanotube-Polycaprolactone Composites with Various and Controllable Concentrations of Ionically-Modified-MWCNTs
Lee. Hae-Hyoung, Shin. Ueon-Sang, Jin. Guang-Zhen, Kim. Hae-Won 대한화학회 Bulletin of the Korean Chemical Society 5 Pages
대한화학회 Bulletin of the Korean Chemical Society 2011, Vol.32 No.1 157-161 (5 pages)
-
마이크로파-폴리올법을 이용한 고분자 전해질 연료전지용 Pt/MWCNTs 촉매의 제조 및 이의 특성분석
이태규, 허승현, Lee. Tae Kyu, Hur. Seung Hyun 한국전기화학회 전기화학회지 6 Pages
한국전기화학회 전기화학회지 2012, Vol.15 No.4 264-269 (6 pages)
본 연구에서는 50 wt%에 달하는 매우 높은 Pt 담지량에서도 장기내구성이 우수한 연료전지용 Pt/MWCNT 촉매를 마이크로파를 이용한 폴리올법을 이용하여 제조하였다. X선 회절분석법과 투과전자현미경 분석결과 마이크로파 조사시간이 늘어남에 따라 Pt의 크기가 증가하였다. 마이크로파 조사시간이 10분, 20분, 30분일 경우 Pt 크기는 각각 4.1, 4.9, 8.5 nm로 나타났다. 마이크로파를 사용하지 않은 기존 폴리올 방법에 의해 제조된 촉매와 비교하였을 경우 Pt 분산도와 장기내구성이 증가한 것으로 나타났다. -
The Modified Electrode by PEDOP with MWCNTs-Palladium Nanoparticles for the Determination of hydroquinone and Catechol
Naranchimeg. Orogzodmaa, Kim. Seul-Ki, Jeon. Seung-Won 대한화학회 Bulletin of the Korean Chemical Society 5 Pages
대한화학회 Bulletin of the Korean Chemical Society 2011, Vol.32 No.8 2771-2775 (5 pages)
-
Synthesis and physicochemical characterization of NixZnx- FeO₂O₄/MWCNT nanostructures as enzyme mimetics with peroxidase-like catalytic activity
Navvabeh Salarizadeh, Minoo Sadri, Hassan Hosseini, Reza. H. Sajedi 한국탄소학회 Carbon Letters 8 Pages
한국탄소학회 Carbon Letters 2017, Vol.24 14 103-110 (8 pages)
(MWCNTs) and magnetic nanoparticles. In this study, magnetic MWCNTs with a structure of NixZnxFe2O4/MWCNT as peroxidase mimics were fabricated by the one-pot hydrothermal method. The structure, composition and morphology of the nanocomposites were characterized with X-ray diffraction (XRD), Fourier transform infrared spectroscopy and transmission electron microscopy. The magnetic properties were investigated with a vibrating sample magnetometer. The peroxidase-like catalytic activity of the... -
Optical sensitivity of DNA-dispersed single-walled carbon nanotubes within cement composites under mechanical load
Jin Hee Kim, Inkyu Rhee, Yong Chae Jung, Sumin Ha, Yoong Ahm Kim 한국탄소학회 Carbon Letters 7 Pages
한국탄소학회 Carbon Letters 2017, Vol.24 12 90-96 (7 pages)
We demonstrated the sensitivity of optically active single-walled carbon nanotubes (SWCNTs) with a diameter below 1 nm that were homogeneously dispersed in cement composites under a mechanical load. Deoxyribonucleic acid (DNA) was selected as the dispersing agent to achieve a homogeneous dispersion of SWCNTs in an aqueous solution, and the dispersion state of the SWCNTs were characterized using various optical tools. It was found that the addition of a large amount of DNA prohibited the... -
Flexural, electrical, thermal and electromagnetic interference shielding properties of xGnP and carbon nanotube filled epoxy hybrid nanocomposites
Young Sil Lee, Yeon Ho Park, Kwan Han Yoon 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2017, Vol.24 6 41-46 (6 pages)
The microstructure, flexural properties, electrical conductivity, thermal conductivity and electromagnetic interference (EMI) shielding effectiveness (SE) of epoxy composites filled with multi-walled carbon nanotubes (CNTs), exfoliated graphite nanoplatelets (xGnPs) and CNT-xGnP hybrid filler were investigated. The EMI SE of the CNT-xGnP hybrid composite was higher than 25 dB at 100 MHz while that of the xGnP based composite was almost zero. The flexural modulus of the CNT-xGnP based epoxy... -
Applications of carbon-based materials in solid phase micro-extraction: a review
Jian Guo, Soo-Jin Park, Long-Yue Meng, Xinghua Jin 한국탄소학회 Carbon Letters 8 Pages
한국탄소학회 Carbon Letters 2017, Vol.24 2 10-17 (8 pages)
With continuous development in the field of sample preparation technology, solid phase micro-extraction (SPME) has been widely used in analytical chemistry for high extraction efficiency and convenient operation. Different materials lead to different extraction results. Among existing materials, carbon-based materials are still attracting attention from scientists due to their excellent physical and chemical properties as well as their modifiable surfaces, which could enhance the adsorption... -
Capacitance behaviors of conducting polymer-coated graphene nanosheets composite electrodes containing multi-walled carbon nanotubes as additives
Hoe-Seung Kim, Yongju Jung, Seok Kim 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2017, Vol.23 9 63-68 (6 pages)
Global warming is rapidly becoming a major concern as a result of the continuing emissions of greenhouse gases generated by the combustion of fossil fuels. To resolve this problem, various studies on efficient energy storage devices have been undertaken. Electronic technologies are increasingly used in electronic products and systems, and they require effective energy storage [1,2]. Supercapacitors are energy storage devices with high power density and long cycle life, and have been spotlighted... -
Adsorption of Nile Blue A from aqueous solution by different nanostructured carbon adsorbents
Shahryar Abbasi, Hadi Noorizadeh 한국탄소학회 Carbon Letters 8 Pages
한국탄소학회 Carbon Letters 2017, Vol.23 5 30-37 (8 pages)
Dyes are widely used in various industries including textile, cosmetic, paper, plastics, rubber, and coating, and their discharge into waterways causes serious environmental and health problems. Four different carbon nanostructures, graphene oxide, oxidized multi-walled carbon nanotubes, activated carbon and multi-walled carbon nanotubes, were used as adsorbents for the removal of Nile Blue A (NBA) dye from aqueous solution. The four carbon nanostructures were characterized by scanning electron... -
Graphene accelerates osteoblast attachment and biomineralization
Jia Ren, Xiaogang Zhang, Yao Chen 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2017, Vol.22 5 42-47 (6 pages)
In this paper, the in vitro biocompatibility of graphene film (GF) with osteoblasts was evaluated through cell adhesion, viability, alkaline phosphatase activity, F-actin and vinculin expressions, versus graphite paper as a reference material. The results showed that MG-63 cells exhibited stronger cell adhesion, better proliferation and viability on GF, and osteoblasts cultured on GF exhibited vinculin expression throughout the cell body. The rougher and wrinkled surface morphology, higher... -
Kinetic and multi-parameter isotherm studies of picric acid removal from aqueous solutions by carboxylated multi-walled carbon nanotubes in the presence and absence of ultrasound
Soheila Gholitabar, Hasan Tahermansouri 한국탄소학회 Carbon Letters 11 Pages
한국탄소학회 Carbon Letters 2017, Vol.22 2 14-24 (11 pages)
MWCNTs-COOH) have been used as efficient adsorbents for the removal of picric acid from aqueous solutions under stirring and ultrasound conditions. Batch experiments were conducted to study the influence of the different parameters such as pH, amount of adsorbents, contact time and concentration of picric acid on the adsorption process. The kinetic data were fitted with pseudo-first order, pseudo-secondorder, Elovich and intra-particle diffusion models. The kinetic studies were well described by... -
The effects of carbon coating onto graphite filler on the structure and properties of carbon foams
Ji-Hyun Kim, Do Young Kim, Young-Seak Lee 한국탄소학회 Carbon Letters 5 Pages
한국탄소학회 Carbon Letters 2017, Vol.21 16 111-115 (5 pages)
Carbon foams (CFms) are of crucial importance in electrical and mechanical devices due to their high thermal conductivity used for eliminating high heat flow and maintaining low temperatures [1]. The most common CFms are types of aluminum alloys, copper and diamond. However, the mechanical properties of metal-based heat sink materials are difficult to control at temperatures over 550°C [2,3]. Thus, CFms are actively investigated as heat sink materials because of their good properties, such as... -
Biocomposite membranes based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and multiwall carbon nanotubes for gas separation
Mongyoung Huh, Hye Min Lee, Young Soo Park, Seok Il Yun 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2017, Vol.21 17 116-121 (6 pages)
The development of gas separation membranes is currently an active research area because of the rapidly increasing interest in carbon dioxide capture and hydrogen recovery, which are two of the most important solutions for problems related to energy and the environment [1-4]. Polymer membranes show selectivity in the separation of gases due to differences in the permeability of individual gases through the polymer film [3,4]. Even though advantageous in terms of low cost, the segmental... -
Formation of nanojoints between carbon nanotubes and copper nanoparticles
Jagjiwan Mittal, Kwang Lung Lin 한국탄소학회 Carbon Letters 7 Pages
한국탄소학회 Carbon Letters 2017, Vol.21 11 86-92 (7 pages)
Exceptional properties and a one dimensional structure make carbon nanotubes (CNTs) a promising candidate for future applications in the electronic industry [1-3]. Because of their smaller dimensions and higher conductivity as compared to copper, multi-walled carbon nanotubes (MWCNT) may increase the bandwidth density of global interconnects [4]. They demonstrate charge carrier mean free paths between 500 nm and 10 μm as compared to 40 nm in metals. CNTs can carry exceptionally high current... -
Synthesize multi-walled carbon nanotubes via catalytic chemical vapour deposition method on Fe-Ni bimetallic catalyst supported on kaolin
Aliyu A, Abdulkareem AS, Kovo AS, Abubakre OK, Tijani JO, Kariim I 한국탄소학회 Carbon Letters 18 Pages
한국탄소학회 Carbon Letters 2017, Vol.21 5 33-50 (18 pages)
(MWCNTs) using catalytic chemical vapour deposition (CCVD) method. The catalysts and MWCNTs prepared using the optimal conditions are characterized using high resolution transmission electron microscope (HRTEM), high-resolution scanning electron microscope (HRSEM), electron diffraction spectrometer (EDS), selected area electron diffraction (SAED), thermogravimetric analysis (TGA), Brunauer-Emmett-Teller (BET), and X-ray diffraction (XRD). The XRD/EDS patterns of the prepared catalyst confirm the... -
Improving dispersion of multi-walled carbon nanotubes and graphene using a common non-covalent modifier
Youbin Kwon, Wonbo Shim, Seung-Yeol Jeon, Ji-Ho Youk, Woong-Ryeol Yu 한국탄소학회 Carbon Letters 9 Pages
한국탄소학회 Carbon Letters 2016, Vol.20 8 53-61 (9 pages)
of MWCNTs and graphene with PAN was investigated for various PAN concentrations, in an attempt to simplify and improve the polymer-wrapping process. Transmission electron microscopy analysis confirmed the wrapping of the MWCNTs and graphene with PAN layers. The interaction between the graphitic structure and the PAN molecules was examined using proton nuclear magnetic resonance, ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and Raman... -
Phenylethynyl-terminated polyimide, exfoliated graphite nanoplatelets, and the composites: an overview
Donghwan Cho, Lawrence T. Drzal 한국탄소학회 Carbon Letters 11 Pages
한국탄소학회 Carbon Letters 2016, Vol.19 1 1-11 (11 pages)
In efforts to characterize and understand the properties and processing of phenylethynyl-terminated imide (LaRC PETI-5, simply referred to as PETI-5) oligomers and polymers as a high-temperature sizing material for carbon fiber-reinforced polymer matrix composites, PETI-5 imidization and thermal curing behaviors have been extensively investigated based on the phenylethynyl end-group reaction. These studies are reviewed here. In addition, the use of PETI-5 to enhance interfacial adhesion between... -
A review: role of interfacial adhesion between carbon blacks and elastomeric materials
Min-Joo Kang, Young-Jung Heo, Fan-Long Jin, Soo-Jin Park 한국탄소학회 Carbon Letters 10 Pages
한국탄소학회 Carbon Letters 2016, Vol.18 1 1-10 (10 pages)
Carbon blacks (CBs) have been widely used as reinforcing materials in advanced rubber composites. The mechanical properties of CB-reinforced rubber composites are mostly controlled by the extent of interfacial adhesion between the CBs and the rubber. Surface treatments are generally performed on CBs to introduce chemical functional groups on its surface. In this study, we review the effects of various surface treatment methods for CBs. In addition, the preparation and properties of CB-reinforced... -
Synthesis, characterization, and toxicity of multi-walled carbon nanotubes functionalized with 4-hydroxyquinazoline
Hasan Tahermansouri, Atieh Mirosanloo, Saeed Heidari Keshel, Mossa Gardaneh 한국탄소학회 Carbon Letters 8 Pages
한국탄소학회 Carbon Letters 2016, Vol.17 No.1 7 45-52 (8 pages)
(MWCNTs)- COOH was achieved through the formation of amide bonds. Then, the functionalized MWCNTs, MWCNT-amide, were treated by phosphoryl chloride to produce MWCNT-quin. The products were characterized by Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, thermogravimetric analysis, derivative thermogravimetric, steady-state fluorescence spectroscopy, and solubility testing. MWCNT-quin showed photo-electronic properties, which is due to the attachment of... -
Characterization and influence of shear flow on the surface resistivity and mixing condition on the dispersion quality of multi-walled carbon nanotube/polycarbonate nanocomposites
Young Sil Lee, Kwan Han Yoon 한국탄소학회 Carbon Letters 7 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.2 3 86-92 (7 pages)
by capillary and injection molding. Shear induced orientation of MWCNT was observed via scanning electron microscopy, in the direction of flow in a PC matrix during the extrusion process. The surface resistivity rose with increasing shear rate, because of the breakdown of the network junctions between MWCNTs. For real applications such as injection molding and the extrusion process, the amount of the MWCNT in the composite should be carefully selected to adjust the electrical conductivity. -
Carbon nanotubes synthesis using diffusion and premixed flame methods: a review
Garima Mittal, Vivek Dhand, Kyong Yop Rhee, Hyeon-Ju Kim and Dong Ho Jung 한국탄소학회 Carbon Letters 10 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.1 1 1-10 (10 pages)
In recent years, flame synthesis has absorbed a great deal of attention as a combustion method for the production of metal oxide nanoparticles, carbon nanotubes, and other related carbon nanostructures, over the existing conventional methods. Flame synthesis is an energyefficient, scalable, cost-effective, rapid and continuous process, where flame provides the necessary chemical species for the nucleation of carbon structures (feed stock or precursor) and the energy for the production of carbon... -
Properties of multi-walled carbon nanotube reinforced epoxy composites fabricated by using sonication and shear mixing
Min Ye Koo, Hon Chung Shin, Won-Seok Kim and Gyo Woo Lee 한국탄소학회 Carbon Letters 7 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.4 4 255-261 (7 pages)
Multi-walled carbon nanotube reinforced epoxy composites were fabricated using shear mixing and sonication. The mechanical, viscoelastic, thermal, and electrical properties of the fabricated specimens were measured and evaluated. From the images and the results of the measurements of tensile strengths, the specimens having 0.6 wt% nanotube content showed better dispersion and higher strength than those of the other specimens. The Young’s moduli of the specimens increased as the nanotube filler... -
Carbon-allotropes: synthesis methods, applications and future perspectives
P. S. Karthik, A. L. Himaja and Surya Prakash Singh 한국탄소학회 Carbon Letters 19 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.4 1 219-237 (19 pages)
The element carbon has been used as a source of energy for the past few hundred years, and now in this era of technology, carbon has played a significant and very prominent role in almost all fields of science and technology. So as an honour to this marvellous element, we humans should know about its various forms of existence. In this review article, we shed light on all possible carbon-allotropes; similarities in their synthesis techniques and the starting materials; their wide range of... -
Excellent field emission properties from carbon nanotube field emitters fabricated using a filtration-taping method
Dong Hoon Shin, Seung Il Jung, Ki Nam Yun, Guohai Chen, Seok-Gy Jeon, Jung-Il Kim, Cheol Jin Lee 한국탄소학회 Carbon Letters 4 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.3 10 214-217 (4 pages)
A filtration-taping method was demonstrated to fabricate carbon nanotube (CNT) emitters. This method shows many good features, including high mechanical adhesion, good electrical contact, low temperature, organic-free, low cost, large size, and suitability for various CNT materials and substrates. These good features promise an advanced field emission performance with a turn-on field of 0.88 V/mm at a current density of 0.1 mA/cm2, a threshold field of 1.98 V/mm at a current density of 1 mA/cm2,... -
Study on lowering the percolation threshold of carbon nanotube-filled conductive polypropylene composites
Seung Bin Park, Moo Sung Lee, Min Park 한국탄소학회 Carbon Letters 8 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.2 8 117-124 (8 pages)
(MWCNTs) than required for pure polypropylene (PP) through two approaches: one using various mixing methods and the other using immiscible polymer blends. Variants of the conductive PP composite filled with MWCNT was prepared by dry mixing, melt mixing, mechanofusion, and compression molding. The percolation threshold (Φc) of the MWCNT-PP composites was most successfully lowered using the mechanofusion process than with any other mixing method (2-5 wt%). The mechanofusion process was found to... -
Superhydrophobic carbon-based materials: a review of synthesis, structure, and applications
Long-Yue Meng, Soo-Jin Park 한국탄소학회 Carbon Letters 16 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.2 5 89-104 (16 pages)
Materials with appropriate surface roughness and low surface energy can form superhydrophobic surfaces, displaying water contact angles greater than 150°. Superhydrophobic carbon-based materials are particularly interesting due to their exceptional physicochemical properties. This review discusses the various techniques used to produce superhydrophobic carbon-based materials such as carbon fibers, carbon nanotubes, graphene, amorphous carbons, etc. Recent advances in emerging fields such as... -
Double-walled carbon nanotubes: synthesis, structural characterization, and application
Yoong Ahm Kim, Kap-Seung Yang, Hiroyuki Muramatsu, Takuya Hayashi, Morinobu Endo, Mauricio Terrones, Mildred S. Dresselhaus 한국탄소학회 Carbon Letters 12 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.2 4 77-88 (12 pages)
Double walled carbon nanotubes (DWCNTs) are considered an ideal model for studying the coupling interactions between different concentric shells in multi-walled CNTs. Due to their intrinsic coaxial structures they are mechanically, thermally, and structurally more stable than single walled CNTs. Geometrically, owing to the buffer-like function of the outer tubes in DWCNTs, the inner tubes exhibit exciting transport and optical properties that lend them promise in the fabrication of field-effect... -
Mechanical and thermal properties of MWCNT-reinforced epoxy nanocomposites by vacuum assisted resin transfer molding
Si-Eun Lee, Seho Cho, Young-Seak Lee 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.1 4 32-37 (6 pages)
strengths of the MWCNT/epoxy composite improved by 59 and 562% with 0.3 phr of MWCNTs, respectively, compared to the epoxy composite without MWCNTs. Thermal stability of the 0.3 phr MWCNT/epoxy composite increased compared to other epoxy composites with MWCNTs. The enhancement of the mechanical and thermal properties of the MWCNT/epoxy nanocomposites is attributed to improved dispersibility and strong interfacial interaction between the MWCNTs and the epoxy in the composites prepared by VARTM. -
Hierarchical porous carbon nanofibers via electrospinning
Aikifa Raza, Jiaqi Wang, Shan Yang, Yang Si, Bin Ding 한국탄소학회 Carbon Letters 14 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.1 1 1-14 (14 pages)
Carbon nanofibers (CNFs) with diameters in the submicron and nanometer range exhibit high specific surface area, hierarchically porous structure, flexibility, and super strength which allow them to be used in the electrode materials of energy storage devices, and as hybrid-type filler in carbon fiber reinforced plastics and bone tissue scaffold. Unlike catalytic synthesis and other methods, electrospinning of various polymeric precursors followed by stabilization and carbonization has become a... -
Modifications of mechanical, thermal, and electrical characteristics of epoxy through dispersion of multi-walled carbon nanotubes in supercritical carbon dioxide
MGH ZAIDI, Sanjeev Joshi, Manoj Kumar, Deepak Sharma, Ashwin Kumar, Sarfaraz Alam, Prakash Sah 한국탄소학회 Carbon Letters 10 Pages
한국탄소학회 Carbon Letters 2013, Vol.14 No.4 4 218-227 (10 pages)
-
Recent Advances in Carbon-Nanotube-Based Epoxy Composites
Fan-LongJin, Soo-JinPark 한국탄소학회 Carbon Letters 13 Pages
한국탄소학회 Carbon Letters 2013, Vol.14 No.1 1 1-13 (13 pages)
-
Fabrication and Applications of Carbon Nanotube Fibers
Hungo Choo, Yeonsu Jung, Youngjin Jeong, Hwan Chul Kim, Bon-Cheol Ku 한국탄소학회 Carbon Letters 14 Pages
한국탄소학회 Carbon Letters 2012, Vol.13 No.4 1 191-204 (14 pages)
