Problems and technologies involved in integrating an audio preamplifier in terms of thick film technology has been discussed in detail. In particular, an attempt has been made to find methods for functional trimming of the amplifer by employing computer analysis. Among seven resistors integrated on a alumina substrate, only one resistor was found to be very sensitive to over all performance of the preamplifier. By trimming this resistor to its freguency charcteristic reguirements, it was possible to cut down trimming labor by one seventh. Besides, problems concerning resistor conductor contacts, crossover parasitic capacitance and the relations between noise per(ormance and trimming method are discussed in detail.