Extrusion-spheronization processing combination was used to produce spherical granules with experimental formulations which contain microcrystalline cellulose as a diluent. The produced granules were compared on the basis of the following physical properties ; (a) bulk density, (e) porosity, (f) friabillity and (g) dissolution rate. With the specific experimental formulations used in this study, the increased plate rotational speeds of Marumerizer (400-1200rpm) produced continually more spherical material and also the obtained data indicated that the particle size distribution and dissolution rate depend upon the amount of microcrystalline cellulose used. As a result, the spherical granule preparation with microcrystalline cellulose has good properties in flow rate, packing propertyu and friability and offers a suitable method of granule preparation in pharmaceutical industry.