The purpose of this study was to apply the position, the form and the angle of the attrition in the natural maxillary central incisors shown on the labial surface to the artificial teeth in the field of prosthetic dentistry. So we should exactly alter the molds of artificial teeth in individual cases in order to make artificial teeth more natural. 226 extracted teeth of the maxillary central incisors were chosen as materials. I have exactly examined the teeth with a magnifying glass and a circular graduator under concentrated light. The observation brought me the following results: 1) The attrition was most prevailing at the range from the mesial angle to the middle part of cutting edge in the left maxillary central incisor, and distal angle of cutting edge in the right maxillary central incisor. 2) On the attrite form of both angles, the angulated form was more than 4 times as frequent as rounded form in the mesial angle, and almost equal in the distal angle. 3) On the attrite form of cutting edge, mesial attrite form including mesial angle was most frequent in the left maxillary central incisor, and distal attrite form including distal angle in the right maxillary central incisor. 4) The angle made by the labial surface and the attrite surface was about $39^{circ}$, and more than 70% of the total examined teeth were included at the range from $31^{circ};to;50^{circ}$. 5) None attrite form at the cutting edge was about 12% and completely attrite form at the cutting edge was about 27% of examined teeth.