- 목재(木材)에 있어서 못의 정적인발저항(靜的引拔低抗)에 관한 연구(硏究)
- ㆍ 저자명
- 김수창,Kim. Su-Chang
- ㆍ 간행물명
- 목재공학
- ㆍ 권/호정보
- 1979년|7권 1호|pp.8-11 (4 pages)
- ㆍ 발행정보
- 한국목재공학회
- ㆍ 파일정보
- 정기간행물| PDF텍스트
- ㆍ 주제분야
- 기타
못의 보지력(保持力)인 정적인발저항(靜的引拔抵抗)에 관(關)하여 Pinus Koraiensis Sieb. et. Zucc. 재(材)와 Larix leptolepis Gord.재(材)의 두 수종(樹種)에 대하여 못 박은 후(後) 시간별(時間別) 차이(差異), 재(材)의 함수율별(含水率別) 및 Radial, Tangential, Longitudinal, 등(等)의 재(材)의 방향별(方向別)에 대해 실험(實驗)한 결과(結果)를 요약(要約)하면 다음과 같다. 1) 못을 박은 후(后) 인발저항(引拔抵抗)은 Larix leptolepis Gord. 재(材)에서는 Tangential이 최대(最大)였다.(Fig 3.) Pinus koraiensis Sieb. et. Zucc. 재(材)는 Tangential이나 Radial의 인발저항(引拔抵抗)은 차이(差異)가 없다.(Fig 2) 2) Longitudinal의 인발저항(引拔抵抗)은 두 수종(樹種) 모두 최소(最小)이다. (Fig 2, 3.) 3) 일정(一定)한 시간후(時間后)에는 Radial 및 Tangential는 두 수종(樹種)이 모두 감소(減少)한다. 4) 재(材)의 함수율(含水率)이 증가함에 따라 두 수종(樹種)이 인발저항(引拔抵抗)은 직선적(直線的)으로 감소(減少)한다. (Fig 4, 5) 5. Larix leptoleis Gord. 재(材)의 인발저항(引拔抵抗)의 감소상태(減少狀態)은 섬유포화점(纖維飽和点) 부근(附近)에서 변곡점으로 나타났다. (Fig 5)
The apparatus for measuring the static withdrawal resistance of nail is the AUTOGROPH S-500 static testing machine. The nails were 0.25 - 0.26 cm in diameter, 4.9-5.1cm in length, and were driven into wood for a depth of 3.0 cm. The physical properties of wood specimens are shown in table 1. Some data obtained in this experiment are as follows 1) The effects of the direction of driving and the time after driving upon static withdrawal resistance are shown in fig. 2-3. 2) The relations between static withdrawal resistance are moisture content of wood are characterized by nearly straight line as shown in fig. 4-5. The empirical formula areas follows: Y = -0.074 x + 12.73 (Pinus koraiensis Sieb & Zucc. - radial) Y = -0.073 x + 7.54 (Pinus koraiensis Sieb & Zucc. - longitudinal) Y = -0.061 x + 12.80 (Larix leptolesis Gord. - tangential) Y = -0.081 x + 7.61 (Larix leptolepsis Gord. - longitudinal) Where Y is the static withdrawal resistance ($kg{cdot}cm$) and x is the moisture content(%).