In order to analyze and investigate in the fatigue behavior of the notched specimens under the two level stressing, the U-notched specimens of structural carbon steel which is generally used is prepared. The obtained results are summarized as follows; (1) The fatigue limit of the U-notched specimens is lower than that of the unnotched. The fatifue notch factor (.betha.) of the U-notched specimens is 1.44 for mild steel and 1.52 for harden steel. The notch sensitivity (q) is 0.68 for mild steel and o.8 for harden steel. That is, these facts show that harden steel is more sensitive to the notch than mild steel. (2) The fatigue life time of the U-notched specimens under the overstressing is shorter than under the constant stressing, and the degree of fatigue life time decrease is different to each stress level; the degree for the high stress level is more than for the low stress level. (3) The fatigue life time of the U-notched specimes under the understressing is longer than under the constant stressing, and the degree of fatigue life time increase for the low stress level is more than for the high stress level.