In order to identify the stress distribution on the furrow slice a small soil bin instrumented with soil stress meters was designed and constructed. From a series of experiments conducted in the soil bin the following results were obtained. 1) Neither the cutting conditions nor the soil conditions affected the direction of the principal stress. 2) The magnitude of the principal stress increased as the tillage depth increased. However, no effects due to lift angles were shown on the magnitude of the principal stresses. 3) The maximum principal stress increased with increase of the moisture and clay contents in the soil. 4) In the clay soil, the maximum principal stresses were distributed uniformly over the tillage depth. However, as the sand content increased, the maximum principal stresses decreased gradually on the top layer so that the distribution over the tillage depth became a trapezoidal shape.