The purpose of this investigation is to study heat transfer characteristics in wall jet region on a flat plate caused by upward impinging water jet. In the wall jet region, heat transfer results by impinging water jet are being compared with the ones with supplementary water. As the radius increases, the heat transfer coefficient in the wall jet region consquently decreases, but decreasing nozzle-heat plate distance, the reduction rate increases. The experimental equation is expressed as follows : $$frac{N_{ur}}{P_r^{0.4}}{cdot}overline{xi}=m(overline{eta}{codt}Re{delta})^n,;m=0.034~0.056,;n=1.74~2.007$$ The optimum height of supplementary water is obtained to improve heat transfer effect of wall jet region.