To investigate the most important factors affecting the mobility of power tiller and to find the method which can be used for predicting the mobility of power tiller in soft paddy field, a series of field experiment was performed with two models of power tiller (8ps and 6ps diesel). From the results obtained throughout field experiment, the following conclusions were derived. 1. The wheel sinkage of power tiller during both traveling and field operations, which mainly influence the mobility, could be predicted from both plate ($50{ imes}100mm$) sinkage and soil cone index (30-degree cone with 2 and $6cm^2$ base area). 2. Prediction of wheel sinkage from the rectangular plate sinkage was found to be more suitable compared with the cone index. 3. The upper limit of rectangular plate sinkage was found as 15 centimeter for operation of power tiller in muddy field which is equivalent of $1kg/cm^2$ of $2cm^2$ cone index value.