소나무 크라프트 펄프제조과정중 회수된 폐액으로 Black liquor-phenol formaldehyde. Methylolated kraft lignin-phenol formaldehyde 및 Lignin cake-phenol rein 세 종류의 접착제가 제조되었다. Black liquor-phenol formaldehyde resin 제조시 Phenol의 약 60%를 크라프트 폐액으로 대치할 수 있다. 본 접착제의 최적압착조건은 $160^{circ}C$에서 7분간이였다.(상태접착력 : 15.77kg/$cm^2$ 내수접착력 : 8.54kg/$cm^2$). Methylolated kraft lignin-pheno] formaldehyde resin 제조시 Phenol의 약 80~90%를 Methylolated kraft lignin으로 대용할 수 있었다. 본 접착제 제조시 pH를 2.6 용매로서 Methanol, 접착제 1g 당 $0.2mell$ Formaldehyde를 첨가하는 것이 접착력이 가장 높았다(상대접착력 : 18.54kg/$cm^2$, 내수 접착력 : 10.08kg/$cm^2$. Lignin cake-phenol ressin에서 Phenol양과 Kraft lignin양이 1 : 1일 경우에 접착력이 높았다. 본 접착제의 최적 압착조건은 $150^{circ}C$에서 4분간이었다.(상태 접착력 : 18.46kg/$cm^2$, 내수접착력 : 12.3kg/$cm^2$).
A kraft black liquor obtained from pulping of pine (Pinus densiflora Sieb et Zucc) was used for producing three kinds of adhesive such as black liquor-phenol formaldehyde resin, methyloeated kraft lignin-phenol formaldehyde resin, and lignin cake-phenol resin. In case of producing black liquor-phenol formaldehyde resin, about 60 percent of the phenolic resin could be replaced by black liquor. Also the optimal press condition appeared to be $160^{circ}C$ for 7 min. (l5.77Kg/$cm^2$ in dry test, 8.54Kg/$cm^2$ in 4 hr. boil test). Phenol could be substituted up to 80-90 percent by methylolated kraft lignin. The suitable conditions of factors affecting bond quality were pH to 2.6, methanol as solvent and 0.2ml formaldehyde per 1g of the adhesives, respectively. The optimal press condition was $150^{circ}C$ for 4 min. (188.54Kg/$cm^2$ in dry test, 10.08Kg/$cm^2$ in 4 hr. boil test). In preparing lignin cake-phenol resin, a suitable mixing ratio of phenol to powered kraft lignin was one to one by weight. The optimal press condition was $150^{circ}C$ for 4 min.(18.46Kg/$cm^2$ in dry test, 12.31Kg/$cm^2$ in 4 hr. hoil test).
