Engine analyzer is developed with the aids of personal computer, A/D converter, interfacing signal transducer and data processing computer programs. The objective of this development are that it should firstly be produced at the resonable low price compared with imported one taking advantage of using existing personal computer and printer, and it should also give good quality of performance. For the attainment of this objective, A/D converter should have been developed to meet the price limit of the equipment. The experiment is performed in a 4 cycle 4 cylinder gasoline engine by this analyzer, and all the information which are necessary for the combustion analysis can be obtained through the processing of the pressure data that are stored in the computer. These are pressure-volume curve, pressure-crank angle curve, the rate of pressure rise and heat release versus crank angle curve etc. With this developed experimental system of resonable price, it will be considered that more easy way of engine data pick-up and processing is possible.