This study is concerned with a job sequencing method using the concept of sampling technique. This sampling technique has never been applied to develop the scheduling algorithms. The most job sequencing algorithms have been developed to determine the best or good solution under the special conditions. Thus, it is not only very difficult, but also taken too much time to develop the appropriate job schedules that satisfy the complex work conditions. The application areas of these algorithms are also very narrow. Under these circumstances it is very desirable to develop a simple job sequencing method which can produce the good solution with the short tine period under any complex work conditions. It is called a sampling job sequencing method in this study. This study is to examine the selection of the good job sequence of 1%-5% upper group by the sampling method. The result shows that there is the set of 0.5%-5% job sequence group which has to same amount of performance measure with the optimal job sequence in the case of experiment of 2/n/F/F max. This indicates that the sampling job sequencing method is a useful job sequencing method to find the optimal or good job sequence with a little effort and time consuming. The results of ANOVA show that the two factors, number of jobs and the range of processing time are the significant factors for determining the job sequence at $alpha$=0.01. This study is extended to 3 machines to machines job shop problems further.