This paper is discussing the Optimum Structural Modification by the Sensitive Analysis Method. The mokificxation for the first Mouth Open Mode of the C type structure was done by using coordinate sensitivities and thickness sensitivities. The results obtained are as follows; 1. the vibration could be minimized by reducing multiples of mode components of impact point and response point. 2. the tooling precision of the Press machine could be minimized by reducing relative vibration amplititutes between the tool and the object to be tooled. 3. the mode componets of 2 points could be identified by using the coordinate sensitivites for the C type structure. 4. the mode components of 2 points could be iodentified by using the thickness sensitivities for the C type structure.