The examination of the pollutants originated from domestic sewage, industrial and agricutural activities the existences of some toxic heavy metals, organic matters and pathogenic microorganisms. A recent report of WHO brought out that such pollutants are in existence with above roughly 2,000 kinds of chemical substances and amongst them about 750 chemicals have been indentified by drinking water. And above 600 kinds of them are organic pollutants and in addition these include carcinogenic mutagenic and poisonous substances. This is not intended to embody a study of broad confined to various approaches on organic materials, and therefore will be THM produced on injection of chlorine at water filtration plant. To specify the relations between THM and factors having an effect upon THM such as TOC, Cl$_{2}$, Temperature, pH and reaction time, first of all the recovery ratio for analytical methods of THM (Head sapce, purge and trap, Liquid/ Liquid Extraction methods) was investigated. Provided that by using it,the correction coefficients are obtained, the accuracy of data might be able to be enhanced through analysis.The result of the experiments are given in the followings. 1) Among three kinds of analytical methods, recovery rate was higher in order of purge and trap Liquid/Liquid Extraction, Head space. There is no great difference in recovery rate among three methods. 2) The higher the concentration of TOC, the more the amount of THM. 3) The higher the reaction temperature, the more the amount of THM. 4) The longer the reaction time, the more the amount of THM. 5) The higher the pH, the more the amount of THM. 6) The higher the concectration of chlorine, the more the amount of THM.