There has been considerable reseach on the representation of a hull form which is a 3-dimensional free surface. A form parameter method to describe the hull form by means of form parameters which represent the characteristics of the given hull form geometry has been recently paid special attention with the advent of powerful computer. However, there have been reported many problems to the conventional form parameter for the practical hull form generation. In the present paper, an attempt has been made to creak hull form by combining the form parameter method with the B-spline curve which can be best fitted to free surfaces. In an application, the present method is used to generates a Bulk carrier hull form and compared with the existing hull form to prove its applicability for the hull form generation.