탄소/탄소 복합재의 산화 저항성을 개선시키기 위하여 aluminum iso propoxide및 aluminum tri sec butoxide졸을 2D-탄소/탄소 복합재에 도포하여 산호 억제층으로서의 효과를 관찰하였다. 촉매/알콕사이드의 몰비가 0.07, 물/알콕사이드의 몰비가 100일때의 산화 억제효과가 양호했으며, 승온속도를 $20^{circ}C$/min로 하여 승온분석시험한 결과는 도포시편이 $80^{circ}C$ 정도의 산화 개시온도가 20%감소되는 시간을 측정한 TGA분석에서는 도포시편이 20% 정도의 산화 저항성 개선효과를 나타냈다. 도포막의 두께는 1회 도포막이 3${mu}$m, 2회 및 3회 도포막이 4-5${mu}$m 정도였고, 열충격 시험은 횟수에 따라 산화량이 증자하였다. 5% 전환률에서의 도포하지 않은 시편의 활성화 에너지는 33.2Kcal/mole이었으며 도포시편의 활성화 에너지는 37.1Kcal/mole이었다.
In order to improve the oxidative resistance of carbon/carbon composites, aluminium-isopropoxide and aluminium-tri-sec-butoxide sol were coated on the surface of 2D--carbon/carbon composiles and the effects uf coating were investigated. The effects of oxidative resistance were dominant in the case of catalyst/alkoxide mole ratio, 0.07, and $H_2O$/alkoxide mole ratio, 100. Through the dynamic TGA analysis with the heating rate of 20%/min, oxidative initiation tempera~ ture was enhanced about $80^{circ}C$. The oxidative resistance effects of alkoxide sol were improved according to the times of coating. Also the 20% weight loss time of coated samples by TGA analysis was 20% better than that of un~ coated samples. The thickness of 1^{st} coated layer was about 3${mu}$m and that of $2^{nd}$ and $3^{nd}$ coated layers was about respectively 4~5${mu}$m and the weight loss were increased with the increasing of thermal shock test times.
