this paper describes the design and implementation of a RISC processor for embedded control systems. This RISC processor integrates a register file, a pipelined execution unit, a FPU interface, a memory interface, and an instruction prefetcher. Its characteristics include both single cycle executions of most instructions in a 2 phase 20 MHz frequency and the worst case interrupt latency of 7 cycles with the vectored interrupt handling that makes it possible to be applicable to the real time processing system. For efficient handling of multi-cycle instructions, data stationary hardwired control scheme equippedwith cycle counter was used. This chip integrates about 139K transistors and occupies 9.1mm$ imes$9.1mm in a 1.0um DLM CMOS technology. The power dissipation is 0.8 Watts from a 5V supply at 20 MHz operation.