The grafting of methacrylonitrile(MAN) onto Kevlar 49 filament surface was carried out by anionic polymerization using sodium methylsulfinylcarbanion formed from sodium hydride and dimethyl sulfoxide(DMSO). The effects of reaction conditions on the grafting percentage(GP) and on the tensile strength of the fiber were investgated. GP marktedly increased with increasing metalation time, and NaH concentration, polymerization temperature and time. The tensile strength of fiber decrased with increasing metalation time, and NaH concentration, polymerization temperature and time. The optimum conditions to increase over 40% of GP with below 10% reduction rate of tensile strength of fiber : NaH concentration ; 30.6 mmol/l/0.5g Kevlar, metalation time : 10min, polymerization tempera- ture : 5$0^{circ}C$, polymerization time: 20 sec, monomer concentration : 1.12mol/l/0.5g Kevlar.