기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
분무열분해법에 의한 $SnO_2$ 박막의 증착
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 분무열분해법에 의한 $SnO_2$ 박막의 증착
저자명
김태희,Kim. Tae-Heui
간행물명
태양에너지
권/호정보
1995년|15권 2호|pp.91-99 (9 pages)
발행정보
한국태양에너지학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

분무열분해법으로 $SnO_2$ 박막을 증착하여 반응변수들이 증착에 미치는 영향을 연구하였다. 분무용액의 농도가 0.01M인 경우 증착온도가 낮을 때에는 증착과정이 표면반응의 지배를 받으며 증착온도가 증가함에 따라 $400^{circ}C$까지는 물질전달의 지배율이 증가한다. $400^{circ}C$ 이상에서는 분무압력이 낮을 때는 물질전달의 지배율이 증가한다. $400^{circ}C$ 이상에서는 분무압력이 낮을 때는 물질전달에 의해, 분무압력이 높을 때는 표면반응에 의해 지배를 받는다. 분무용액의 농도가 증가함에 따라 증착속도는 증가하였으며 본 실험의 경우 Rideal-Eley 기구에 의해 증착반응이 일어났다. 기판의 온도가 증가함에 따라 증착속도는 증가하다가 $400^{circ}C$ 이상에서는 균일한 핵생성에 의하여 증착속도는 감소하였다. 분무지속 시간에 비례하여 증착층의 두께는 증가하였으며 기판과 증착층간에는 물리적인 접착을 이루고 있다.

기타언어초록

The influence of deposition parameters on the deposition of $SnO_2$ thin films by spray pyrolysis has been studied. In the case of spray solution with tile concentration of 0.01M, at low deposition temperature the deposition was controlled by surface reaction and portion controlled by mass transfer is increased with increasing deposition temperature to $400^{circ}C$. Above $400^{circ}C$, the deposition is controlled by mass transfer at low spray pressure, and by surface reaction at high spray pressure. As the concentration of spray solution increased the deposition rate increased, and in this experiment the deposition depends on the Rideal-Eley mechanism. The deposition rate increased with increasing substrate temperature up to $400^{circ}C$ and then decreased due to homogeneous nucleation. The thickness of the deposit increased with increasing spray duration, and the adhesion between substrate and deposit was formed physically.