This paper descrisbes the implementation of a 20D DCT that can be used for video conference, JPEG, and MPEG-related applications. The implemented DCT consists of two 1-D DCTs and a transposed memory between them, and uses ROM-based multipliers instead of conventional ones. As the system bit length, the minimum bit length that satisfies the accuracy specified by the ITU standard H.261 was chosen through the simulations using the C language. The proposed design uses a dual port RAM for the transposed memory, and processes two bits of input-pixel data simultaneously t ospeed up addition process using two sets of ROMs. The basic system architecture was designed using th Synopsys schematic editor, and internal modules were described in VHDL and synthesized to logic level after simulation. Then, the compass silicon compiler was used to create the final lyout with 0.8um CMOS libraries, using the standard cell approach. The final layout contains about 110, 000 transistors and has a die area of 4.68mm * 4.96mm, and the system has the processing speed of about 50M pixels/sec.