Monopulse technique has been widely used for a bearing estimation of a desired signal. This method can estimate the bearing of the signal with only one pulse, so computational load and complexity are low and its processes are simple. But if the desired signal incidents with interferences or multiple signals exist in the beams, the method fails to estimate correct signal angle. To solve this problem, the method to use adaptive array was proposed. In conventional adaptive array methods, sum beam was formed with fixed weights and ifference beam was formed with adaptive weights determined to minimize beamformer output power with one or more linear constraints, or an algorithm to minimize each sum beam and difference beams simultaneously using adaptively formed one basic beam. Theroretical analyses and simulation results show that the performance of the proposed method is superior to that of conventional algorithms.