An investigation made of the easing contraction ratio according to sewing condition (seam line; wp, wf, 45$^{circ}$ bias, stitch density; 13 stitch/cm (0.8 mm), 9 stitch/cm (1.1 mm), 6.5 stitch/ cm (1.5 mm), 5 stitch/cm (2 mm), 4 stitch/cm (2.5 mm), thread; sp 60$^{circ}$s/2, sp 60$^{circ}$s/3, st 60$^{circ}$s/3, st 50$^{circ}$s/3)) by lockstitch industrial sewing machine with shirring foot. The correlations of the easing and sewing conditions were by SPSS PC), and visual test was done by enlarged photo. The results obstained were as follows:. 1. The easing contraction ratio is increased in proportion to the low of stitch density. 2. The easing contraction ratio of wp, 45$^{circ}$ bias is correlated with stitch density, and that of wf be with stitch density, elongation & weight. 3. The easing contraction ratio of 13 stitch/cm (0.8 mm), 9 stitch/cm (1.1 mm), 6.5 stitch/ cm (1.5 mm), 5 stitch/cm (2.0 mm) is correlated with flexible rigidity, and that of 4 stitch/ cm (2.5 mm) be with flexible rigidity and crease-resistance. 4. As a results of SPSS PC+ statistics, the easing contraction ratio is statistically correlated to the seam line, stitch density, upper thread tension, and fabric characteristics. 5. As a results of visual test by the enlarged photo, the limit of stitch density for easing contraction was 5 stitch/cm (2.0 mm).