A new stereo matching method for the relative orientation and the photogrammetric triangulation has been pro-posed. It matches the pairs of conjugate points to be used as pass points and tie points in digital aerial photographs instead of selecting these points with manual point transfer and measurements. Three unique steps included in the proposed matching method are as followings. The first step is searching interest points, and designating them as candidate points to be matched. The second is matching the points from the pair of images by the Cross Correlation Method in both direction(left to right direction and right to left). The third is selecting consistent pairs in the both matching directions. Computer programs based on the proposed matching method have been developed, and with digital aerial photographs which have full ground coordinate information tests were performed to know reliabiliy and positional accuracy of proposed method. Results of the tests reveal that the proposed matching method can eliminate the in-correctly matched pairs more efficiently than other matching methods, thus this can be more reliably applied to the relative orientation and the photogrammetric triangulation.