Bentonites that are used currently for the civil engineering puppose in our country were investigated to reveal their physico-chemical properties such as viscosity, swelling volume, cation exchange capacity (CEC) and chemical composition, and to compare the content of their constituting minerals and their characteristics using the X-ray diffraction and infrared spectrum methods. The content of montmorillonite in the hentonites ranges from 50 to 79%. As the content of montmorillonite in the hentonites increases, the viscosity, swelling volume, water content, methylene blue adsorption, CEC, and the amount of clay-size particles tend to increase in general. Because these properties also show good correlation within them, the results can he used to infer the characteristics of hentonites indirectly. However, a few samples do not show this correlation hetween the properties. This is probably due to the characteristics of constituting minerals of raw ore and manufacturing process. A saraple with lowest content of rnontrnofiiionite was shown to be inferior in the physico-chemical properties that are needed for the civil engineering-purpose bentonites.