Reliability management requires many activities such as conceptual design, detail design, reliability evaluation and analysis, life testing, and environmental screening, etc.. To perform these activities effectively, a lot of information are required : information for failure mechanism, failure modes, part characteristics, and environmental conditions, etc.. These information should be managed to be used effectively and accurately in reliability activities and feedback to product design and manufacturing. This study identified and characterized these information and classified them according to the reliability activities commonly adopted in many manufacturing industries. IDEF1 was used to define and characterize the flow and the relationship of these reliability information and model is proposed which represents the structure of reliability information systems. The proposed model can be used as a basis for developing reliability management softwares.