Shewhart control chart is a basic technique to monitor the state of a process. We observe samples of size four or five and plot some statistic(e.g., mean or range) of each sample on the chart. When setting up the chart, we need to obtain u, pp.r and lower control limits. It is common practice that those limits are calculated from the preliminary 20-40 samples presumed to be homogeneous. However, it may ha, pp.n in practice that the samples are contaminated by outlying observations caused by various reasons. The presence of outlying observations make the control limits wider and hence decrease the sensitivity of the charts. In this paper, we introduce robust control charts with tighter control limits when outlying observations are present in the preliminary samples. Examples will be given via simulation study.