In this paper, the design and imprlementation of dual-band power amplifier which is used as a critical part for mobile phone to be simultaneously working at a dual band, 800MHz CDAM and PCS frequency band is described. DC operating point of power FET is limited to Class-B to enable long talk time considering that the tyupical power range of CDMA phones in working is around 10 to Class-B to enable long talk time considering that the typical power range of CDMA phones in working is around 10 to 15dBm, i.e., liner range. The power amplifier which employs two GaAs FETs with good linerity at a low operating point has duplexer cuplexer circuit to separate two frequency bands at input and output stage. Electromagnetic analysis for via holes and coupling between narrow transmission lines is included to design a circuit. Moduld size of 0.96CC($22{ imes}14.5{ imes}3mm^3$) and maximum module current of 130mA at output power range, 10 to 15dBm are attained. The power amplifer module has achieved ACPR performance with 2 to 3dB marging from IS-95 requirement at output powers, 23.5dBm for PCS and 28dBm for 800MHz CDMA respectively.