In the development of large complex assembly, most design changes are from the following reasons.: 1) insufficient consideration of assembling sequence of downstream process. 2) interference and fit-up of related parts. 3) initial design changes which are not completely resolved. In order to reduce the first reason of above, the assembly-centric modeling methodology was proposed in the part (1) of the thesis. In this part (2), a Digital Mock-Up system, which is a tool to build a virtual mock-up in design stage, has been developed in order to prevent the other two reasons. The system can build a virtual assembly in various ways as followings.: 1) assembling parts which are located in user defined envelope. 2) assembling parts with the specified disciplines. 3) assembling parts that are selected in the part list. It can also make an assembly by the combination of above methods. In addition to that, it has the functions to read/write the virtual assembly and to explode parts of the assembly in desired direction. With the virtual assembly, engineers can design interference free parts without making physical mock-up. The system has been implemented with Oracle database management system in CATIA environment.