In this study, the optimum cutting 6equency and level of mineral nitrogen fertilization were investigated for the production of Reed canarygrass in uncultivated rice paddy. The results are summarized as follows; 1. Higher relative dry matter yields were recorded in 2nd cut of plots with 3 and 5 cutting frequencies, and 3rd cut of plot with 4 cutting kquency, respectively. 2. With no nitrogen fertilization, mean dry matter yields per year were 6.2~7.6 tonsha and the highest yield appeared in plot with 4 cutting 6equency. 3. The increased fertilization of mineral nitrogen resulted in the increased dry matter yield. Significantly higher dry matter yields than that of no nitrogen fertilization were recorded in fertilization of 90 kg nitrogen per year in 3 cutting fequency, 240 kg in 4 cutting frequency and 150 kg in 5 cutting 6equency respectively. 4. Efficiency of dry matter production with nitrogen fertilization(kg DMkg N) was higher in 30kg Nhalcut in 3 and 5 cutting eequency, 60kg Nhalcut in 4 cutting 6equency respectively. In each cutting kequency, the higher efficiency of dry matter production appeared in 1st cut in 3 cutting kequency, and 2nd cut in 4 and 5 cutting 6equency respectively. 5. Economic N level(kg/ha) was 179.5~242.3kg/ha in 3 cutting 6equency, and 189.6-241.6kg/ha and 167.0 ~253.2kg/ha in 4 and 5 cutting 6equency respectively, and marginal dry matter yields were 11.4~ 12.3 tons/ ha, 11.2 ~ 11.8 tons/ha and 8.3 ~9.1 tons/ha in 3, 4 and 5 cutting 6equency respectively. 6. The limiting N fertilization level to the highest dry matter were estimated to be 569.9kg/ha, 492.4kg/ha and 654.lkg/ha in 3, 4 and 5 cutting kequency respectively.