기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
Silane Coupling Agent 첨가에 의한 MDF Cement Composite의 수분안정성 연구
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • Silane Coupling Agent 첨가에 의한 MDF Cement Composite의 수분안정성 연구
저자명
노준석,김진태,박춘근,오복진,최상홀
간행물명
요업학회지
권/호정보
1998년|35권 5호|pp.421-428 (8 pages)
발행정보
한국세라믹학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

순수 HAC/PVA 계 및 epoxy 수지와 urethane이 첨가된 HAC/PVA 계 MDF 시멘트 복합재료에 서로 다른 관능기를 갖는 3종류의 silane coupling agent를 첨가하여 강도 및 수분안정성에 대한 영향을 살펴보고 기공율 분석을 통해 미세구조와 강도의 관계를 살펴보았다. Silane의 관능기에 따라 각각의 MDF 시멘트 복합재료의 강도 및 수분안정성 향상에 대한 효과가 다른 것을 알 수 있었다. 순수 PVA 메트릭스의 경우에 대해서는 vinyl 기를 갖는 silane이 효과적인 영향을 나타내었으며 epoxy수지가 첨가된 MDF 시멘트에 대해서는 epoxy-methoxy 기를 갖는 silane이, 그리고 urethane이 첨가된 MDF 시멘트에 대해서는 diamine 기의 silane이 효과적이었다. Silane의 첨가량에 따라서는 urethane이 첨가된 MDF 시멘트 복합재료의 경우, diamine 기의 silane이 많이 첨가될수록 수분안정성이 향상되었으며 특히 2wt%의 silane을 첨가하고 wqrm press를 이용하여 성형하였을 때 건조 강도는 약 20% 향상되었으며 습윤강도는 40~70%까지 크게 향상되었다. 이는 기공율과 밀접한 관계가 있음을 알 수 있었다. Epoxy 수지가 첨가된 MDF 시멘트의 경우에서도 2wt%의 silane 첨가까지는 그 첨갈향이 많아질수록 강도가 향상되는 것을 알 수 있었지만 과량의 silane(4wt%)이 첨가될 경우에서는 오히려 특성저하가 나타났다.

기타언어초록

The effect of silane coupling agents on the water stability of HAC/PVA based MDF cement composites which were modified with urethane and epoxy resin were studied as a function of the functional groups and addition amount of silane coupling agent. According to the composition of polymer matrix the silanes with different functional groups showed the different effectiveness. In case of the only PVA matrix the silane with vinyl functional group was more effective than other silanes. When the epoxy resin was added the silane of epoxy-methodxy group enhanced the flexural strength of dry and wet state more than other. In case of urethane-added MDF cement the silane of diamine group was effective and enhanced the water sta-bility fo MDF cement composite more and more as the addition amount of silane increased, Especially in case of warm-presed composite the effect of silane was enhanced By addition of 2wt% of silane with 야-amine group the flexural strength of urethane-added composites were enhanced by 20% more in dry state 40-70% in wet state in accord with the porosity analysis. The flexural strength of the poxy resin-added MDF cement composite was increased by addition of 1wt% and 2wt% silane of epoxy-methoxy group However the addition of 4wt% of silane decreased the flexural strength of dry and wet state by formation of closed pore in the polymer matrix.