Co/Ti 이중막을 급속열처리하여 형성한 $CoSi_{2}$에 $As^+$을 이온주입한 후, 500~$1000^{circ}C$에서 drive-in 열처리하여 매우얇은 $n_{+}$ p접합의 다이오드를 제작하고 I-V 특성을 측정하였다. $500^{circ}C$에서 280초 drive-in 열처리하였을 때, 50nm정도의 매우 얇은접합이 형성되었고, 누설전류가 매우 낮아 가장 우수한 다이오드 특성을 나타내었다. 특히, Co 단일막을 사용한 다이오드에 비해 누설전류는 2order 이상 낮았으며, 이는 $CoSi_{2}$Si의 계면이 균일하였기 때문이다.
$As^+$ was ion-implanted onto $CoSi_{2}$ thin films formed by rapidly thermal-annealed Co/Ti bilayers. Then the specimens were drive-in annealed at 500~100$0^{circ}C$ to form ultra-shallow $n^+$p junction diodes and to measure their 1- V characteristics. When drive-in annealed at 50$0^{circ}C$ for 280 sec., 50 nm thick ultra-shallow junctions were formed and di¬odes showed the best 1- V characteristics with low leakage current. In particular. the leakage current was 2 orders lower than that of diodes formed by using Co monolayer. It was attributed to uniform $CoSi_{2}$/Si interfaces
