A computer-controlled system for measuring dielectric hysteresis has been developed. This system consists of the wave generation par, the high voltage amplifier part, the measurement part, the data acquisition part and the related controll circuits and is interfaced to P.C(personal computer). The applied voltage and its frequency are controlled by P.C . Since the measured datas can be saved in the RAM of P.C, the analysis and the graphics of the datas are very convenient. As a accuracy test, the capcitances of the commercial mica and styroll capacitors were measured by applying high voltage and the results were good agreement with the rating values. In the test of PZT ceramic sample, the typical D-E hysteresis loops were obtained by applying a single frequency voltage to the sample, and $varepsilon-E$ and D-E hysteresis loops could be measured at the same time by applying a double frequency voltage to the sample.sample.