기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
산업부산물(제강 Sludge, 제강 Slag)을 이용한 시안 흡착 제거
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 산업부산물(제강 Sludge, 제강 Slag)을 이용한 시안 흡착 제거
저자명
이정원,현재혁,조재범
간행물명
토양환경
권/호정보
1998년|3권 2호|pp.89-99 (11 pages)
발행정보
한국지하수토양환경학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

수질 오염중 많은 비중을 차지하는 시안은 독성을 띠는 특정 수질 유해 화합물이다. 이를 함유한 산업폐수가 지표수 및 지하수에 유입되면 동식물 및 수생태계에 커다란 영향을 미칠 수 있다. 본 연구에서는 제강 공정에서 다량 배출되는 산업 부산물인 제강슬러지와 제강슬래그를 이용하여 수중의 시안에 대한 흡착 제거 실험을 행하였으며 농도, pH, 온도 등의 영향 변수에 대하여 처리 효율과의 상관관계 및 흡착 평형, 가수분해식 등을 통하여 활성화 에너지( Ea )를 산출하였다. 결과를 살펴 보면, 초기 농도가 1 mg/$ell$에서 5 mg/$ell$, 10 mg/$ell$, 20 mg/$ell$로 증가함에 따라, 흡착제거율이 증가함을 알 수 있고, 또한 pH가 높아짐에 따라, 온도가 증가함에 따라 흡착제거율이 증가함을 알 수 있다. 농도 변화시 흡착제거율 순서는 20 mg/$ell$> 10 mg/$ell$> 5 mg/$ell$> 1 mg/$ell$이고, pH 변화시 흡착제거율 순서는 pH 11 > pH 7 > pH 3, 온도 변화시 흡착 제거는 흡열반응을 나타내므로 흡착제거율 순서는 $50^{circ}C$ > $37^{circ}C$> $25^{circ}C$로 나타났다. 활성화 에너지( Ea )는 1 mg/$ell$와 20 mg/$ell$에서 각각 127.93 J/mol, 59.44 J/mol로 나타나 저농도에서 온도의 변화가 흡착에 매우 민감하게 작용함을 알 수 있다. 위의 실험 결과를 바탕으로 산업 부산물을 이용한 오염물 제거 관점에서 제강슬래그와 제강슬러지는 차수 및 복토재로서의 적용 가능성이 높음을 알 수 있다.

기타언어초록

Sorption of the aqueous cyanide onto steel mill sludge and steel mill slag, both of which are the by-products from the converter furnace, was studied. In the study, the influence of temperature, activation energy, concentration and pH on sorption of cyanide was investigated. Three different temperature($25^{circ}C$ > $37^{circ}C$> $50^{circ}C$) was chosen to represent that of landfill leachate. Initial concentration was 1 mg/$ell$ 5 mg/$ell$, 10 mg/$ell$, and 20 mg/$ell$. In addition, pH was set to three different level, that is, 3, 7, and 11 respectively. As the result of batch mode experiment for cyanide adsorption, the removal rate was found to be proportional to the initial concentration of cyanide. The order of removal rate was 20 mg/$ell$> 10 mg/$ell$> 5 mg/$ell$> 1 mg/$ell$. Similarly the influence of pH was proportional because of the change in solubility of cyanide. The order of removal rate was pH 11 > pH 7 > pH 3. As the temperature increased, so did the removal rate. The reaction was endothermic and the value of activation energy(Ea) was 127.93 J/mole and 59.44 J/mole respectively at 1 mg/ιand 20 mg/ιof initial concentration. From the experiment, it can be postulated that the capability of steel mill by-products to attenuate aqueous cyanide is enough to be used as substitute for clay liner of landfill site in the aspect of pollutant removal.