The purpose of this is providing a simple, relatively errorless body surface area calculation. Subjects were 10 married women and 10 singles women whose age was 20 to 29 years old. The Gypsum method has applied for the sampling of body surface. The Weight method has been used to measure body surface by means of transferring gypsum shape on uniform plane polypropylene films. In this study, compare analyzed errors between the traditional formulas for measuring body surface area and measuring data in this experiment. More than all, it has been to induce a regression equation for measuring body surface area, which is so simple to calculate with less errors, with variable factors as weight and height. The results of this experiment as follows : 1. In the traditional formulas, weight formula was shown high average error : Niya`s height formula. which was modified K value as 0.62 in the height formula (S = KH) is shown lower average error than Lassabliere`s Height formula. 2. In the weight-height formula (S=K √WH), it was shown high average error according to the increasing of K value. Kawanami`s formula, which 5.378 as K value, was shown low average error both the singles and the married women. 3. Dubois weight-heingt formula (S=W^a·H_b·K) was shown low average error than the weight, height, weight-height (S=K√WH) formula. 4. The regression equations with variable factors as weight and height are 156.74W + 86.05H - 660.25 (Single women) and 136.02W + 90.57H - 6241.32 (Married women) the average error and absolute average error to the singles are 0.09%, 0.94% and resoectively -0.13%, 1.16% for the married women.