In this dissertation, the characteristics of W-CDMA(Wideband CDMA) are studied and required specifications of IMT-2000 transceiver using W-CDMA method are proposed. Also, in order to design the RF circuits satisfied the proposed specifications, theoretical models are expanded and real circuits are made. Then the RF circuits of the mobile stations are implemented in the three parts, transmitter, receiver and frequency synthesizer and are evaluated. The frequency synthesizer is designed using techniques of swallow counter and passive 3rd loop filter. For improving characteristics of the loop, a LPF was added to the 2nd loop filter. So although the locking times are loosed, the spurious are reduced. The output power of transmitter is over 50mW, the spurious output is -40dB/30kHz at 5MHz offset and power control range is -20dB at 2.5V. The proposed specifications are considered in highly practical environment and the theoretical designs and the experiments are expressed as simply as possible in order to facilitate understanding. It stands to reason that the results of this study can be used to design the wider CDMA(25MHz Bandwidth) mobile communication systems.