In this paper, we present the methods to predict the milled surface shapes in profile milling process. In the cutting process, tools are deflected due to the cutting forces varying with the imposed depth of cut and feedrate. Thus, the final shapes of the milled surface, generated by the nominal tool trajectory, are different from the required profile. In order to predict the milled surface shapes, we present two methods based on: (1) the deflected tool profile and (2) the trace of contact point between the tool and the workpiece. In the first method, we make an assumption that the milled surface corresponds to the deflected tool profile. In another method, we make we make an assumption that the milled surface is generated by the trace of the contact point between the cutting edge of the tool and workpiece. We present the surface generation process by calculating the trajectory of the contact points on the workpiece. Several simulations and experiments are performed to verify the proposed milled surface prediction methods.