Creep tests for type 316L(N) stainless steel were carried out using constant-load creep machines at 55$0^{circ}C$, 575$^{circ}C$ and $600^{circ}C$. Material constants necessary to predict creep rupture time were obtained from the experimental creep data. And the applicability of Monkman-Grant(M-G) and modified M-G relationships was discussed. The log-log plot of M-G relationship between the rupture time($t_r$,) and the minimum creep rate ($ $varepsilon$ _m$</TEX>) was dependent on test temperatures. The slope of m was 1,05 at 55$0^{circ}C$ and m was 1.30 at $600^{circ}C$. On the other hand, the log-log plot of modified M-G relationship between $t_r/$varepsilon$_r$</TEX>, and $ $varepsilon$ _m$</TEX> was independent on stresses and temperatures. That is, the slope of m＇ was approximately 1.35 in all the data. Thus, modified M-G relationship for creep life prediction could be utilized more reasonably than that of M-G relationship for type 316L(N) stainless steel. It was analyzed that the constant slopes regardless of temperatures or applied stresses in the modified relationship were due to an intergranular fracture grown by wedge-type cavities.