- 페로망간제조 분진에서 질산과 활성탄에 의한 망간의 침출
- ㆍ 저자명
- 이계승,김형석,송영준,신강호,김윤채,조동성
- ㆍ 간행물명
- 資源리싸이클링 : 한국자원리싸이클링학회지
- ㆍ 권/호정보
- 2000년|9권 4호|pp.44-49 (6 pages)
- ㆍ 발행정보
- 한국자원리싸이클링학회
- ㆍ 파일정보
- 정기간행물| PDF텍스트
- ㆍ 주제분야
- 기타
중저타소페로망간을 제조하는 AOD공정의 bag filter에 포집된 분진은 약 63%의 Mn을 함유하며, XRD로 분석된 결정체는 Mn$_{3}O_{4}$이지만, 질산으로 Mn을 침출하면 MnO$_{2}$가 잔류되기 때문에 67%이하의 침출율을 나타낸다. 따라서 활성탄으로 환원배소한 후에 침출하는 방법과 침출시에 활성탄을 첨가하는 방법으로 침출율을 높이고자 하였따. 70$^{circ}C$, 0.5N HNO$_{3}$ pilp density 7 g/l 의 액에 분진된 10%이상으로 활성탄을 첨가하면 90%이상의 Mn이 침출되었고, 5%의 활성탄을 혼합하여 750$^{circ}C$에서 배소한 분진은 상온에서 6N HNO$_{3}$에 150 g/l을 첨가하였을 때에 99%이상의 Mn이 침출되었다.
Among dusts which were generated in AOD process producing a medium-low carbon ferromanganese, the dust collected in bag filter contained manganese about 63% and its phase was $Mn_3$$O_4$. the maximum extraction of Mn by nitric acid is about 67% because of remaining amorphous $MnO_2$. Therefore this research investigated reducibility of the activated charcoal in Mn extraction from the dust. Addition of charcoal over 10% of pulp density made possible Mn extraction of 90% at $70^{circ}C$, 0.5N $HNO_3$. To convert $Mn_3$$O_4$ to MnO by reducing roasting, the minimum mixture ratio of activated charcoal was 5% in $750^{circ}C$, 1 hour. Extraction of Mn from the reduced dust was over 99% with nitric acid at $25^{circ}C$, 6N $HNO_3$, pulp density 150 g/l§.