- 비등흡수에 의한 에폭시 복합재료의 기계적 특성 및 전기적 특성 변화에 관한 연구
- ㆍ 저자명
- 이덕진,신성권,김재환
- ㆍ 간행물명
- 照明·電氣設備學會論文誌
- ㆍ 권/호정보
- 2000년|14권 1호|pp.53-58 (6 pages)
- ㆍ 발행정보
- 한국조명전기설비학회
- ㆍ 파일정보
- 정기간행물| PDF텍스트
- ㆍ 주제분야
- 기타
본 논문에서는 에폭시 복합 절연재료를 옥외에서 사용할 경우 수분의 영향을 고찰하기 위하여 비등홉수조건에 서 기계적 강도와 절연파괴강도의 변화를 측정하였다. 또한 내습성을 개선하기 위한 방법으로 이전에 보고하였던 상호침입망목 수법을 도입하여 그 효과를 비교 검토하였다. 두 종류의 모체수지에 충진재를 0, 50, 100 [phr] 첨가하여 총 6종류의 시편을 제작하였다. 그 결과, 비등흡수시간과 충진재 함량이 증가함에 따라 수분 흡수율이 증가되었고, 기계적 강도와 절연파괴강 도가 저하됨올 확인하였다. 반면 상호침입망목 시편의 경우에서는 접착강도의 개선에 의하여 홉수율이 낮아지고, 기계적 강도와 절연파괴 강도의 저하율이 완화됨을 확인하였다.
In this paper, the variable mechanical strength and dielectric breakdown strength of epoxy composites were measured at boiling absorption condition in order to observe the influences of moisture in out door use. Also, in order to improve water resistance of matrix resin, IPN(interpenetrating polymer network) method which had been already reported, was introduced and the influence was investigated. As Adding filter(SiO2) classified by o[phr], 50[phr] and 100[phr] to two kinds of matrix resin, six kinds of specimens were manufactured. As a result, it was confirmed that the moisture absorption rate was increased and mechanical strength and dielectric breakdown strength were degraded with boiling time and filler content increasing. On the other hand, it was confirmed that moisture absorption rates were decreased and the degrading rates of mechanical strength and dielectric breakdown strength were lowered according to improvement of adhesion strength in case of IPN specimens.