The purpose of this study was to confirm the possibility of screen printing with Natural dyes. The coloring matter such as sappan wood was used in order to obtain the colorant powder through the processes of extraction, low pressure concentration and the spray dry. After the screen printing on silk and cotton fabrics with colorant, K/S value changes of color and color fastness were measured. The main resets were as follows : 1. The viscosity of printing thickeners of sappan wood powder was about 15,200 cps, and the highest K/S value of the fabrics printed with sappan wood was obtained at 90$pm$2$^{C}$ of steaming temperature and 80 minutes of steaming time. 2. For the fabrics printed with sampan wood, adding of urea was not effective, since the more the concentration of urea increased, the more K/S values decreased. 3. For the natural dyes printing, the more the concentration of colorants increased, the more K/S values increased. In general, the K/S values of the printed fabrics were higher when treated with mordants rather than without mordants. Specifically, the λmax sappan wood was 520∼570 nm, and the K/S value was highest when treated with Cu mordant and lowest when treated with Sn. 4. Generally, the color fastness was relatively fair.