A special double drier structure at a plant level is developed to recycle old ascon as well as an economic mixture rate of old with new is analyzed under safety consideration in this thesis. Based upon the experimentations performed throughout this research, 35% of old ascon mixture is found to be the best for flow test, stability, air void, density, and moisture susceptibility. It is also found that mixture does not meet the requirement in indirect tensile test, However, it is concluded that it is not critical at all since the experimental results present that the difference is too small to give any meaningful indication. A good return for the investment of this facility can be obtained if the mixture rate guideline suggested in this research is kept.