An understanding of potential lumber cutting yields may lead to increased utilization of the lower grades of lumber in wood industry. Computer simulations of rough-mill operations require a lumber database as input to give reasonable estimates of such yields. The lumber database must contain detailed information regarding the location and type of defects, and then all manufacturing sequences can be tested with the same raw material. However, no suitable lumber database with mapped defects exists for Korean wood industry. In this study lumber databases of Pinus densiflora S. et Z and Quercus acutissima which are the main Korean domestic species were developed to prepare for coming era of "utilization of domestic species" in the near future. These databases were put into lumber cut-up simulation model(gang-rip-first simulator) to investigate the part yields. Gang-rip first simulation showed average part yields of 44.75% and 63.10% for Quercus acutissima and Pinus densiflora lumber database developed, respectively. In most cases process set-up of fixed blade best feed showed the best part yields and the level of acceptable defects could not make significant differences in part yields.