A simulation package has been developed as an event-driven system that can handle the hardware configuration of STC104 and algorithm proposed in the sister paper of ‘Study on High Speed Routers(II).’After various STC104 topology of meshes, torus, and hypercubes are constructed using up to 512 switches, the performance of each topology has been analyzed under different message generation rate in terms of throughputs, latency, and packet blocking time. Modified multicast algorithms for STC104 have been proposed for STC104 after U-mesh and U-torus in order to overcome the multicasting difficulty because of the point-to-point communication method found in STC104. The performance of the multicast algorithms have been analyzed over meshes and torus configuration. Throughput gets higher in the order of mesh, torus, and hypercube. Throughput difference among topology were distinctive in the zone of high message generation rate. Latency and blocking time increased in the order of hypercube, torus, and mesh. U-mesh and U-torus of software multicast showed similar throughput, however, U-mesh peformed slightly better result. These algorithms showed eight to ten times better results compared to individual message pass for 90 destination nodes. Multi-link environment also showed better performance than single-link environment because multi-link network used the extra links for communication.