The effects of salting methods on textural properties of Kakdugi were evaluated during fermentation at 1$0^{circ}C$ for up to 52 days. Kakdugi samples were prepared by 4 different salting methods at final salt concentration of 1.5%, which is appropriate for organoleptic quality. The salting methods for radish cubes(2 cm size) of Kakdugi were as follows; 1) Treatment S-1: spraying dry salt uniformly on to the radish cubes at 1.5%(w/w) and holding for 1 hr, 2) Treatment S-5: spraying dry salt uniformly on to the radish cubes at 1.2%(w/w) and holding for 5 hr, 3) Treatment B-1: brining radish cubes in a 8.5%(w/v) salt solution for 1 hr, 4) Treatment B-5: brining radish cubes in a 4.0%(w/v) salt solution for 5 hr. The contents of water soluble pectin, total soluble solid and PG activity were increased as the fermentation periods increased. A majority of total dietary fiber(TDF) consisted of soluble dietary fiber(SDF), and the amount of insoluble dietary fiber(IDF) was relatively small in Kakdugi during fermentation. Furthermore, an increase in SDF and a consequent decrease in IDF contents were observed with the fermentation time increased.