The purposes of this study were to investigate, analyze, and consider the feature and practical situation of Apparel CAD education and distribution situation of CAD system so that CAD education can be effectively operated and managed in various kinds of relevant schools and universities. 32 colleges and universities that are performing CAD educational system are selected for the study. The author of the study has investigated and obtained the information through questionnaires to 32 professors who are in charge of CAD lectures and 301 students who are receiving CAD education. The result is as follows. 1. It showed that 62.5% of CAD educational systems have been practically introduced after 1995. Regarding the using system, YUKA occupies 46.9%, PAD 21.8%, and GERBER 18.8% and these three kinds of system have been chiefly supplied. 40.6% of them own only one system, 37.5% of them own 2～5 systems and 78% of them own less than 5 systems. 2. The most seriously pointed problems during the operation of CAD system were the lack of experimental materials and the frustration of manpower supply. Thus, the CAD education programs in schools and universities are practiced in inferior environments internally and externally. 3. Regarding the practical situation of CAD education, 28 among 32 schools and universities are performing CAD as one of the regular subjects for the curriculum. 4. Regarding satisfaction degree of the using system, professors showed higher satisfaction degree than students did. In conclusion, it showed that although the practical situations of CAD education in schools and universities have been changed and improved so much since 1995 owing to the increase of the positive recognition of the necessity of CAD, many students in the educational sites cannot study their favorite subjects related with CAD program with interest due to the lack of experimental facilities, the poor computer management systems, and the problems of manpower supply, etc.